Weslo Pursuit 4.8 Bike English Manual - Page 5

ASSEMBLY To hire an authorized service technician to assemble the exercise cycle, call 1-800-445-2480. Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the pack- ing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included tools, assembly requires your own Phillips screwdriver and adjustable wrench . As you assemble the exercise cycle, use the drawings below to identify the small parts used in assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity used in assembly. Note: Some small parts may have been preassembled. If a part is not in the parts bag, check to see if it has been preassembled. M10 Curved Washer (54)-4 M8 Washer (53)-3 M8 Split Washer (50)-4 M8 Nylon Locknut (46)-3 M10 Nylon Locknut (44)-4 Acorn Cover (35)-4 M8 x 15mm Button Screw (51)-4 M5 x 16mm Self-tapping Screw (52)-4 M10 x 70mm Carriage Bolt (16)-4 1. While another person lifts the rear of the Frame (1), attach the Rear Stabilizer (7) to the Frame with two 1 M10 x 70mm Carriage Bolts (16), two M10 Curved Washers (54), and two M10 Nylon Locknuts (44). Next, press two Acorn Covers (35) onto the Nylon Locknuts. 35 44 54 7 35 44 54 1 16 16 5