Weslo Pursuit 4.8 Bike English Manual - Page 6

2. While another person lifts the front of the Frame (1), attach the Front Stabilizer (6) with two M10 x 70mm Carriage Bolts (16), two M10 Curved Washers (54), and two M10 Nylon Locknuts (44). Next, press two Acorn Covers (35) onto the Nylon Locknuts. 2 16 3. Attach the Seat (4) to the Seat Post (34) with three 3 M8 Washers (53) and three M8 Nylon Locknuts (46). Note: The Washers and Nylon Locknuts may be pre- attached to the underside of the Seat. Remove the Seat Knob (20) by turning it counterclockwise. Next, insert the Seat Post (34) into the Frame (1). Align one of the adjustment holes in the Seat Post with the indicated hole in the Frame. Insert the Seat Knob into the Frame and the Seat Post, and turn the Seat Knob clockwise until it is tight. Make sure that the Seat Knob is inserted into one of the adjustment holes in the Seat Post. 6 54 44 35 1 54 44 35 4 34 53 46 53 46 20 Hole 1 6