Weslo Pursuit 4.8 Bike English Manual - Page 7

4. While another person holds the Upright (2) in the 4 position shown, connect the Upper Wire Harness (56) to the Reed Switch Wire (57). Gently pull the excess Upper Wire Harness (56) upward from the top of the Upright (2), and then slide the Upright onto the Frame (1). Be careful to avoid pinching the wires. Next, attach the Upright with four M8 x 15mm Button Screws (51) and four M8 Split Washers (50). Be careful to avoid pinching the wires 50 51 2 51 50 51 56 57 1 5. The Console (5) requires four 1.5V "D" batteries 5 (not included); alkaline batteries are recommended. IMPORTANT: If the exercise cycle has been exposed to cold temperatures, allow it to warm to room temperature before inserting batteries into the Console. If you do not do this, the con- sole displays or other electronic components may become damaged. Press the tab on the bat- tery cover and remove it. Insert four batteries into the Console as shown. Make sure that the batter- ies are oriented as shown by the diagram on the battery cover. Then, reattach the battery cover. 5 Batteries Tab Battery Cover 7