Weslo Pursuit E40 Bike English Manual - Page 12
two M6 Stop
View all Weslo Pursuit E40 Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
HOW TO ADJUST THE BELT The exercise cycle features a precision belt that must be kept properly adjusted. If the belt causes exces- sive noise or slips as you pedal, the belt should be checked. To do this, the left side shield must first be removed. See the instructions on page 11 and remove the left side shield. Next, use an 16 adjustable wrench to turn the right pedal counterclock- wise and remove it. Remove the right side shield. Press down on the center of the Belt (16) between the front and rear sprockets. There should be from 1/4" to 3/4" of ver- tical movement in the center of the Belt. If the Belt (16) is properly adjusted, reattach the side shields and pedals. If the Belt needs to be adjusted, loosen the M8 Washer Nut (37) on each side of the Flywheel (32). To tighten the Belt, turn the 16 two M6 Stop Nuts (47) clock- wise; to loosen 32 the belt, turn the Nuts coun- terclockwise. 37 Make sure that 47 the Flywheel is straight and tighten the M8 Washer Nuts (37). Reattach the side shields and pedals. 12