Whirlpool GBD309PVS Owners Manual - Page 17

OVEN RACKS ■ Self-Cleaning cycle: See "Self-Cleaning Cycle" first. Remove racks or they will discolor and become harder to slide. If this happens, a light coating of vegetable oil applied to the rack guides will help them slide. ■ Steel-wool pad TEMPERATURE PROBE (on some models) ■ Plastic scouring pad Oven Lights The oven lights are 12-volt, 5-watt maximum halogen bulbs. They will come on when the oven door is opened. On double oven models, both upper and lower lights will come on when either door is opened. The oven lights will not work during the SelfCleaning cycle. When the oven door is closed, touch OVEN LIGHT to turn light on or off. To Replace: Before replacing the bulb, make sure the oven is off and cool. 1. Disconnect power. 2. Remove glass light cover by grasping the front edge and pulling away from oven. Oven Door For normal oven use, it is not suggested to remove the oven door. However, if removal is necessary, make sure the oven is off and cool. Then, follow these instructions. The oven door is heavy. To Remove: 1. Open oven door all the way. 2. Flip up the hinge latch on each side. 3. Close the oven door as far as it will shut. 4. Lift the oven door while holding both sides. Continue to push the oven door closed and pull it away from the oven door frame. To Replace: 1. Insert both hanger arms into the door. 3. Remove bulb from socket. 4. Replace bulb, using tissue or wearing cotton gloves to handle bulb. Do not touch bulb with bare fingers. 5. Replace bulb cover by snapping back into wall. 6. Reconnect power. 2. Open the oven door. You should hear a "click" as the door is set into place. 3. Move the hinge levers back to the locked position. Check that the door is free to open and close. If it is not, repeat the removal and installation procedures. 17