Whirlpool WFE510S0AS Installation Guide - Page 8

Power Supply Cord Electrical Connection - U.S.A. Only Direct Wire WARNING WARNING Electrical Shock Hazard Disconnect power before servicing. Use a new 40 amp power supply cord. Plug into a grounded outlet. Failure to follow these instructions can result in death, fire, or electrical shock. Electrical Shock Hazard Disconnect power before servicing. Use 8 gauge copper or 6 gauge aluminum wire. Electrically ground range. Failure to follow these instructions can result in death, fire, or electrical shock. 1. Disconnect power. 2. Remove the terminal block cover screws located on the back of the range. Pull cover down and toward you to remove cover from range. 4. Add strain relief. Style 1: Power supply cord strain relief ■ Remove the knockout for the power supply cord. ■ Assemble a UL listed strain relief in the opening. A B C A. Two mounting tabs each side B. Terminal block cover C. Hex-head screws 3. Remove plastic tag holding three 10-32 hex nuts from the middle post of the terminal block. A A. UL listed strain relief ■ Tighten strain relief screw against the power supply cord. 8