Whirlpool WFW9620HBK Owners Manual - Page 15
Touch and hold START/PAUSE
View all Whirlpool WFW9620HBK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Info Touch to access Service & Support, Store Demo Mode, Restore Factory, WiFi Terms and Conditions, and Software Terms and Conditions. Follow the screen prompts. NOTE: All changes to settings will remain in effect until settings are changed again. 14. Remove garments promptly after cycle is finished 12. Touch and hold START/PAUSE button for 3 seconds to begin cycle Touch and hold the START/PAUSE button for 3 seconds to start the cycle. To pause a cycle in progress, touch the START/PAUSE button once; then touch again to continue the cycle. To cancel a cycle, touch the "X" on the touch screen to the right of the estimated time remaining and run Drain & Spin to remove any excess water. At each stage of the process, you may notice sounds or pauses that are different from traditional washers. After you touch and hold the START/PAUSE button, you will notice the 'Add Garment' prompt on the machine. See the 'Unlocking the door to add garments' section for more information on what this means. The drum will make a partial turn. The door will click when it locks. Once the door has locked, the washer will begin spinning to sense load size. This sensing process will continue throughout the cycle. After the load size is sensed, the estimated time based on load size will be displayed and water will be added. You may hear water flowing through the dispenser, adding detergent to the load. The actual cycle time may be lengthened; however, the display will continue to show the estimated time. Unlocking the door to add garments: If you need to open the door to add one or two missed garments, you may do so when "Add Garments" appears on the display. The time allowed to add a garment will vary based on cycle selection and load size. Touch ADD GARMENTS once; the door will unlock once the washer movement has stopped. This may take several seconds. Then close the door and touch and hold Start again to restart the cycle. Adding items after "Add Garments" is no longer displayed: Cancel the current cycle. Water will drain and you will need to reselect the cycle and restart. 13. Touch POWER button to turn off washer after cycle ends The Power button is also used to turn on the washer before use. Promptly remove garments after cycle has completed to avoid odor and rusting of metal objects on garments. When unloading garments, pull back the door seal and check for small items between the tub and the washer drum. If you will be unable to remove the load promptly after a washonly cycle, use the FanFresh® option (see Step 10). NOTES: n This washer has a tight seal to avoid water leaks. To avoid odors, leave the door open to allow the washer to dry between uses. Setting a delayed start 4:28 3:15 What to Wash How to Wash REGULAR NORMAL Temperature WARM Soil Level LOW Spin Speed EXTRA FAST Touch POWER until the indicators turn on. From the home screen, make sure the washer is set to the correct time and date (if it is not, see Step 11 for instructions on how to set the time and date). Touch the clock icon on the far right portion of the touch screen. The "Select a start time" screen will show on the display. Scroll horizontally to select a preferred start time for your wash cycle. The times will display in 15-minute increments up to 8 hours. Touch OKAY to set the start time. The display will return to the home screen and the clock icon will turn brown. To delete or modify the delayed start, touch the clock icon again and follow the screen prompts. 15