Whirlpool WGT4027EW Installation Guide - Page 16
Plan Vent System - canada
View all Whirlpool WGT4027EW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Plan Vent System Recommended exhaust installations Typical installations vent the washer/dryer from the rear. Other installations are possible. D A Alternate installations for close clearances Venting systems come in many varieties. Select the type best for your installation. Three close-clearance installations are shown. Refer to the manufacturer's instructions. E F B G C H A. Dryer B. Rigid metal or flexible metal vent C. Clamps D. Wall E. Elbow F. Clamps G. Elbow H. Exhaust hood Optional exhaust installations: This washer/dryer can be converted to exhaust out the right or left side. To convert the washer/dryer, use Side Exhaust Kit Part Number 279823. If your washer/dryer was previously exhausted from the right or left side, it can be converted to rear exhaust by using standard offset connections. To cover the hole in the side, one of the following plugs can be added: 692790 (white) 3977784 (biscuit) Follow the instructions in the kit to install. Kits are available from the dealer from whom you purchased your washer/dryer. A B C A. Standard rear offset exhaust installation B. Rear exhaust for offset close-clearance connection C. Left- or right-side exhaust installation 16 A B C A. Loop system with standard elbows B. Loop system with one offset and one standard elbow C. Vent system with one periscope (2" [51 mm] clearance) NOTE: The following kits for close-clearance alternate installations are available for purchase. Venting Kits For more information, call 1-800-901-2042, or visit us at www.applianceaccessories.com. In Canada, call 1-800-807-6777 or visit us at www.whirlpoolparts.ca. Part Number Descriptions 4396028 Over-the-Top Installation 4396037 0" (0 mm) to 18" (457 mm) Metal vent periscope (For use with dryer vent to wall vent mismatch) 4396011 18" (457 mm) to 29" (737 mm) Metal vent periscope (For use with dryer vent to wall vent mismatch) 4396014 29" (737 mm) to 50" (1.27 m) Metal vent periscope (For use with dryer vent to wall vent mismatch) 4392892 In-Wall metal DuraVent™ Periscope 279818 4-way vent kit - white W10186596 4-way vent kit - universal grey 4396028 Sure Connect™ venting kit (over-the-top installation) 4396009RP 5' Universal connect vent, flexible dryer venting 4396010RP 6' SecureConnect™ vent, flexible dryer venting 4396013RB Dryer vent installer's kit 4396033RP 5' flexible dryer venting with clamps 4396727RP 8' flexible dryer venting with clamps 4396004 Dryer offset elbow 4396005 Wall offset elbow 4396006RW DuraSafe™ close elbow 4396007RW Through-the-wall vent cap 4396008RP 4" steel dryer venting clamps - 2 pack 8212662 Flush mounting louvered vent hood 4"