Whirlpool WOS51EC7A Installation Instructions - Page 12
Install Oven
View all Whirlpool WOS51EC7A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
3-Wire Cable from Home Power Supply - U.S. Only IMPORTANT: Use the 3-wire cable from home power supply where local codes permit a 3-wire connection. A B C G H D E I F A. Cable from home power supply B. Junction box C. Black wires D. White wires E. Green (or bare) ground wire (from oven) F. 4-wire flexible conduit from oven G. Red wires H. UL listed wire connectors I. UL listed or CSA approved conduit connector 1. Connect the 2 black wires (C) together using a UL listed wire connector. 2. Connect the 2 white wires (D) and the green (or bare) ground wire (of the oven cable) using a UL listed wire connector. 3. Connect the 2 red wires (G) together using a UL listed wire connector. 4. Install junction box cover. Install Oven 1. Using 2 or more people, lift the oven partially into the cabinet cutout. Use the oven opening as an area to grip. NOTE: Push against seal area of the oven front frame when pushing the oven into the cabinet. Do not push against the outside edges. 2. Push against the seal area of the front frame to push the oven into the cabinet until the back surface of the front frame touches the front wall of the cabinet. 3. Push oven completely into the cabinet and center the oven into the cabinet cutout. NOTE: If you have model KEBK171B, KEBK101B, KEBK276B, KEBK206B, KEBS179B, KEBS109B, KEBS277B, KEBS279B, KEBS207B or KEBS209B, proceed to Step 6. 4. Insert the grommet into the mounting rail hole using a flatblade screwdriver. Insert the screwdriver into the grommet and turn ¹⁄₄ turn counterclockwise. Make sure the grommet stays in position. IMPORTANT: If the grommet is not installed, the front frame will be damaged. A B C A. Mounting rail B. Mounting rail hole C. Grommet 5. Securely fasten oven to cabinet using the # 8-14 x ¾" screws provided. Insert the screws through hole in the grommet. Do not overtighten screws. 12