Whirlpool WOS51EC7A Installation Instructions - Page 9
Double Ovens, Cutout height is between 48, 124.1 cm and 50, Cutout Height is between 50, 128.2 cm
View all Whirlpool WOS51EC7A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
6. Using 2 or more people, place the oven in its upright position. Cutout Height is between 50¹⁄₂" (128.2 cm) and 51¹⁄₈" (129.9 cm) 1. Using 2 or more people, place the oven on its back on a covered surface. 2. Install a foot on the left rear spacer using a #8-18 x ³⁄₈" screw. NOTE: Position the foot so the long side of the foot is facing toward the top of the oven. 7. Go to the "Make Electrical Connection" section. Double Ovens The positioning of the oven feet allow a double oven to be installed in a cutout height between 48⁷⁄₈" (124.1 cm) and 52 132.6 cm). Refer to the following instructions to position the feet for the size of your cabinet cutout. Cutout height is between 48⁷⁄₈" (124.1 cm) and 50 128.1 cm) The oven feet do not need to be installed. The oven is configured correctly as received. NOTE: Do not remove the spacers. Go to the "Make Electrical Connection" section. A B C A. Spacer B. Foot C. #8-18 x ³⁄₈" screw 3. In the same manner, install a foot on the right rear of the oven. 4. Install a front foot on the left front spacer using a #8-18 x ³⁄₈" screw. NOTE: Position the foot so the long side of the foot is facing toward the inside of the oven. A. Spacers A B C A A A. Front foot B. #8-18 x ³⁄₈" screw C. Spacer 5. In the same manner, install a front foot on the right front of the oven. 9