Whirlpool WRF995FIFZ Use & Care Guide - Page 17
Reset Filter - Touch Fast Cool And Energy Saver
View all Whirlpool WRF995FIFZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
4. Remove the water filter cap from the water filter. 5. Install the water filter cap onto the new filter. Be sure to align the arrows so the grooves in filter align with ribs in filter cap. 8. Push the water filter door closed. 6. Insert the filter into the housing. 7. Twist the water filter and turn 90° clockwise until it locks into place and that arrows are aligned. The Water Filter Status Light The water filter status lights will help you know when to change your water filter. The Whirlpool® App will also send notifications to your mobile device and tell you the filter life remaining (100% to 0%). ■■ ORDER FILTER (yellow) - It is almost time to change the water filter. "Order Filter" display is on all of the time but off in Cooling Off and Showroom mode. ■■ REPLACE FILTER (red) - Replace the water filter. While you are dispensing water, "Replace Filter" will blink 7 times and an alert tone will sound 3 times. NOTE: "REPLACE FILTER" will remain illuminated if a filter is not installed or is installed incorrectly. ■■ RESET FILTER - Touch FAST COOL and ENERGY SAVER for 3 seconds to reset water filter. The display will do a 3-second countdown, then flash the icon and play a tone. 17