Whirlpool WRR56X18F Owners Manual - Page 5

Door 1. Remove the hinge thimble hole plug from the top of the door. 2. Remove the door stop from the bottom of the door. 3. Move the door stop to the opposite side, making sure that the hole in the door stop plate is aligned perfectly with the hole in the door for the bottom hinge pin. 4. Using the screws removed in Step 2, fasten the door stop bracket to the bottom of the door. 5. Tighten all screws. Set aside the door until the bottom hinge is in place. Replace Door and Hinges NOTE: Graphic may be reversed if door swing is reversed. 1. Replace the parts for the bottom hinge as shown and tighten screws. See "Bottom Hinge" graphic. Replace the refrigerator door. NOTE: Provide additional support for the door while the hinges are being moved. Do not depend on the door magnets to hold the door in place while you are working. 2. Assemble the parts of the top hinge as shown in the "Top Hinge" graphic. Do not tighten the screws completely. Final Steps WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 1. Plug into a grounded 3 prong outlet. 2. Reset the control. See "Using the Control." 3. Return all removable door parts to door and food to refrigerator. 5