Whirlpool WRR56X18F Owners Manual - Page 9
Key Eject Lock on some models, Refrigerator Features
View all Whirlpool WRR56X18F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Door Ajar Alarm (on some models) The Door Ajar alarm lets you know when the refrigerator door has been open for 5 minutes or longer and the cooling is turned on. This alarm feature will sound an alert tone that will repeat every 2 minutes. Close the door to turn off the tone. The feature is reset and will reactivate when the door is again left open for 5 minutes. NOTE: To mute the alert tone while keeping the door open, such as while cleaning the inside of the refrigerator, press TEMP SETTING on the control panel. The alert tone will be temporarily turned off. Key Eject Lock (on some models) To lock or unlock the refrigerator, you must hold the key in the lock while turning. The lock is spring loaded, so the key cannot be left in the lock. 2. Replace the shelf by lowering the shelf onto the supports on the side wall. Crisper Drawers To Remove and Replace a Drawer: 1. Slide drawer straight out to the stop. Lift the front of the drawer and slide it out the rest of the way. 2. Replace a drawer by sliding it back in, fully past the stop. Crisper Cover To Remove the Crisper(s) Cover: 1. Remove crisper(s). Hold the glass, insert firmly with one hand, and press up in the center of the glass insert until it rises above the plastic frame. Slowly slide the glass insert forward to remove. 2. Lift the cover frame and remove it. If the key is lost, contact your dealer for a replacement. Always give the model and serial number of your refrigerator when requesting a replacement key. NOTE: Keep the key out of the reach of children. Do not keep the key close to the refrigerator. Refrigerator Features Important information to know about glass shelves and covers: Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. Tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use both hands when removing them to avoid dropping. Refrigerator Shelves Store similar foods together and adjust the shelves to fit different heights. This reduces the time the refrigerator door is open and saves energy. To Remove and Replace a Shelf: 1. Remove the shelf by lifting straight up and pulling the shelf out. To Replace Crisper Cover: 1. Fit the back of the cover frame into the supports on the side walls of the refrigerator. Lower the front of the cover frame into place. 2. Slide the rear of the glass insert into the cover frame and lower the front into place. Crisper Humidity Control (on some models) You can adjust the amount of humidity in the moisture-sealed crisper using the settings between "+" and "-". "-" (open) lets moist air out of the crisper for best storage of fruits and vegetables with skins. ■■ Fruit: Wash, let dry, and store in refrigerator in plastic bag in crisper. Do not wash or hull berries until they are ready to use. Sort and keep berries in original container in crisper. ■■ Vegetables with skins: Place in plastic bag or plastic container and store in crisper. "+" (closed) keeps moist air in the crisper for best storage of fresh, leafy vegetables. ■■ Leafy vegetables: Wash in cold water, drain, and trim or tear off bruised and discolored areas. Place in plastic bag or plastic container and store in crisper. Door Bin To Remove and Replace the Bin: 1. Remove the bin by tipping the front of the bin forward and sliding out. 2. Replace the bin by sliding it in above the desired support and tilting it back into place. 9