Whirlpool WTW8700EC Use & Care Guide - Page 15

11. Touch and hold START/PAUSE button to begin cycle 12. Remove garments promptly after cycle is finished Touch and hold the START/PAUSE button for 3 seconds to start the wash cycle. When the cycle has finished, the end beep will sound (if set). The Whirlpool™ app will send a "Clothes Clean Notification" (if set). See "Using Your Washer - Smart Operation" on page 16. Unlocking the lid to add items If you need to open the lid to add 1 or 2 missed items: Touch the START/PAUSE button to pause the washer; the lid will unlock once the washer movement has stopped. This may take several minutes if the load was spinning at high speed. Then close the lid and touch and hold the START/ PAUSE button again to restart the cycle. IMPORTANT: If the lid is left open for more than 10 minutes, the water will pump out and F8E6 error code will appear on the display. Promptly remove items when cycle is done to avoid odor, reduce wrinkling, and avoid rusting of metal hooks, zippers, and snaps. If you will be unable to remove the load promptly, you may remotely activate the Load Fresh option from the Whirlpool™ app. See "Using Your Washer - Smart Operation" on page 16. NOTE: A small amount of water may remain in the dispensers after the wash cycle is complete. This is normal. 15