Xbox B4J-00174 Setup Guide - Page 12

english STORAGE 20 With the Xbox 360 Hard Drive (included) or an Xbox 360 Memory Unit (sold separately) you can save games and other media, and enable Xbox Live sign-in. Removable Hard Drive Your Xbox 360 comes with a hard drive attached but should you ever need to remove it, use the following procedures for removal and reattachment. To remove your hard drive: 1 Turn off your console. 2 Press the tab on the front of the hard drive and lift the unit from the console. To attach your hard drive: 1 Turn off your console. 2 Position the hard drive over the hard drive bay with the thin end (the front) pointed toward the front of the console, and the thick end (the back) pointed toward the back of the console. 3 Place the back of the hard drive against the back of the hard drive bay. Make sure the ridge along the back of the hard drive rests beneath the lip on the back of the hard drive bay. 4 Push the front end of the hard drive down until the tab clicks. Memory Units You can also connect up to two portable memory units (sold separately) to the memory unit ports on the front of the Xbox 360 console for additional storage. Memory units are smaller than your hard drive, but designed to be portable you so you can take your Xbox Live profile or saved games to other Xbox 360 consoles. You can also take your memory unit to participating retailers and download content from their Xbox 360 Demo Kiosks. ADD WIRELESS CONTROLLERS Up to four controllers, wired and wireless, can be actively connected to a console at one time. Each connected controller gets a quadrant on the Ring of Light. Before you can connect a wireless controller, at least one quadrant must be free (unlit). To disconnect a controller, remove the battery pack from a connected wireless controller or disconnect a wired controller cable connector. To connect your wireless controller to your console: 1 Press the Xbox Guide button to turn on the controller. 2 Press the Power button to turn on the console. 3 Press the Connect button on the console. 4 Press the Connect button on the controller. 5 After the Ring of Light on the controller and console spin and flash once, the controller is connected. The quadrant that remains lighted indicates the controller's position. 21 english