Xbox B4J-00174 Setup Guide - Page 5

english Connect to a Digital Audio Optical AV System (Optional) If your system (typically, a receiver or amplifier) supports digital audio input, you can connect to digital audio rather than to the standard left and right audio. Digital audio should produce higher-quality sound. To connect to digital audio: 1 Connect your video input as described before. 2 Connect your digital audio cable (not included) to the digital audio output on your AV cable and to the digital audio input on your receiver. NOTE After you've set up your Xbox 360 console, you can configure additional console audio settings and test your connection from the System area of the Xbox Dashboard. Before doing so, proceed through the steps in the following pages for connecting to power, connecting your controller and other initial settings. CONNECT THE CONSOLE TO POWER Electrical Safety As with many other electrical devices, failure to take the following precautions can result in serious injury or death from electric shock or fire or damage to the Xbox 360 video game system. Select an appropriate power source for your Xbox 360 console: • Use only the power supply unit and AC power cord that came with your console or that you received from an authorized repair center. If you are not sure if you have the correct power supply unit, compare the model number on the power supply unit with the model number specified on your console. If you need a replacement power supply unit or AC power cord, contact Xbox Customer Support. • Confirm that your electrical outlet provides the type of power indicated on the power supply unit (in terms of voltage [V] and frequency [Hz]). If you are not sure of the type of power supplied to your home, consult a qualified electrician. • Do not use non-standard power sources, such as generators or inverters, even if the voltage and frequency appear acceptable. Only use AC power provided by a standard wall outlet. • Do not overload your wall outlet, extension cord, power strip, or other electrical receptacle. Confirm that they are rated to handle the total current (in amps [A]) drawn by the Xbox 360 console (indicated on the power supply unit) and any other devices that are on the same circuit. • Use a properly grounded electrical outlet that accommodates the threeprong grounding plug. Do not remove the grounding prong. If the plug does not fit into your outlet, have an electrician replace the obsolete outlet. 6 To avoid damaging the power cords and power supply: • Do not wrap power cords around the power supply. • Protect the power cords from being walked on. • Protect cords from being pinched or sharply bent, particularly where they connect to the power outlet, the power supply unit, and the console. • Do not jerk, knot, sharply bend, or otherwise abuse the power cords. • Do not expose the power cords to sources of heat. • Keep children and pets away from the power cords. Do not allow them to bite or chew on them. • When disconnecting the power cords, pull on the plug-do not pull on the cord. • Do not let the power supply hang from either power cord. If a power cord or power supply becomes damaged in any way, stop using it immediately and contact Xbox Customer Support for a replacement. Unplug your Xbox 360 video game and entertainment system during lightning storms or when unused for long periods of time. Always connect the power cords according to the following instructions: 1 Fully insert the power supply cord into the Xbox 360 console until it clicks. 2 Plug the AC power cord into the power supply until it stops. 3 Plug the other end of the AC power cord into the wall outlet. 7 english