Xerox 3150 User Guide - Page 27
If you want to change the paper size in the tray, see, Changing the Paper Size in the Paper Tray
UPC - 095205048308
View all Xerox 3150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
You can load previously printed paper. The printed side should be facing up with an uncurled edge on top. If you experience problems with paper feed, turn the paper around. Make sure that all four corners are flat in the tray. NOTE: If you want to change the paper size in the tray, see "Changing the Paper Size in the Paper Tray" on page 2.9. 4 Pay attention to the paper limit mark on the left inside wall of the tray. Paper overloading may cause paper jams. 5 Slide the tray back into the printer. 2.8 SETTING UP YOUR PRINTER
2.
8
S
ETTING
U
P
Y
OUR
P
RINTER
You can load previously printed paper. The printed side
should be facing up with an uncurled edge on top. If you
experience problems with paper feed, turn the paper
around.
Make sure that all four corners are flat in the tray.
N
OTE
:
If you want to change the paper size in the tray, see
“Changing the Paper Size in the Paper Tray” on page 2.9.
4
Pay attention to the paper limit mark on the left inside wall
of the tray. Paper overloading may cause paper jams.
5
Slide the tray back into the printer.