Xerox 4260S System Administration Guide - Page 145
Con Network Authentication - SMB (Windows ADS), Allow Guest Access]
UPC - 095205742985
View all Xerox 4260S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Standard Authentication 7. Click on [Require Network Authentication]. 8. To allow guests to access the machine, select the [Allow Guest Access] option and enter the required [Passcode] for the guest account. NOTE: You cannot leave the Passcode blank. 9. Select the [SMB (Windows NT 4)] option as the Authentication Type. 10. Click on [OK]. 11. Enter the [Domain] name within the [Required Information] area. NOTE: If the Primary Domain Controller to which the users are to be authenticated resides on a different subnet from the machine, select the Optional Information checkbox and enter the IP address or Host Name of the Primary Domain Controller. This is done because the SMB broadcast cannot get through a router unless the router is configured to allow it. Entering the IP address or Host Name will allow the authentication request through the router. 12. Enter your Backup Domain information in the [Additional Information] area. 13. Select the [Always prompt for logoff after each Scan job] option, in the Logoff Reminder area, if you want to enable this feature. 14. Click on the [Apply] button to accept the changes. If prompted, enter the Administrator's User ID [admin] and Password [1111], and click on [Login]. 15. Follow the steps in Verify that LDAP Authentication is enabled at the machine on page 135 to check that you have setup authentication correctly. Configure Network Authentication - SMB (Windows ADS) 1. At your Workstation, open the web browser, enter the TCP/IP Address of the machine in the Address bar. 2. Press [Enter]. 3. Click on the [Properties] tab. 4. Click on the [Security] link. 5. Click on the [Authentication] link. 6. Click on the [Authentication] link. 7. Click on [Require Network Authentication]. 8. To allow guests to access the machine, select the [Allow Guest Access] option and enter the required [Passcode] for the guest account. NOTE: You cannot leave the Passcode blank. 9. Select the [SMB (Windows ADS) option as the Authentication Type. 10. Click on [OK]. 11. Enter your Default Domain information in the [Required Information] area. Xerox WorkCentre 4250/4260 Series System Administration Guide 133