Xerox 4260S System Administration Guide - Page 38
tty Method, SCO, Information Checklist, Procedure, Con the Client, TCP/IP protocol - specifications
UPC - 095205742985
View all Xerox 4260S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
3 Network Installation tty Method 1. Enter su to access Super User mode. 2. Enter sh to run the Bourne shell. 3. Define the machine as a BSD style printer, by entering the command: lpsystem -t bsd hostname Where hostname is the machine hostname from the /etc/hosts file. 4. Create the queue, by entering the command: lpadmin -p queuename -s hostname -T unknown -I any Where queuename is the name of the queue being created. 5. Enter Exit to exit the Bourne shell 6. Enter Exit to exit Super User mode. 7. Test the queue created, by entering the command: lp -d queuename /etc/hosts. 8. Verify that the job prints at the machine. SCO SCO UNIX workstations require specific installation steps to communicate with the machine. The machines are BSD-style UNIX printers, whereas SCO is a System V-style UNIX. Information Checklist Before starting the Installation procedure, please ensure that the following items are available and/or the tasks have been performed: 1. Existing operational network utilising the TCP/IP protocol. 2. Ensure that the machine is connected to the network. 3. Static IP Address for the machine. 4. Subnet Mask Address for the machine. 5. Gateway Address for the machine. 6. Host Name for the machine. Procedure 1. Follow the steps in Chapter 3, Configure Static IPv4 Addressing using the Machine User Interface, Procedure on page 14 until step 38, then return to this page. Configure the Client 1. Add the machine printer hostname to the etc/hosts file on the SCO workstation. 2. Ensure that you can Ping the machine from the SCO workstation. Perform the following steps to create a machine print queue on a SCO UNIX workstation using either the GUI or the TTY method. 26 Xerox WorkCentre 4250/4260 Series System Administration Guide