Xerox 4260S System Administration Guide - Page 35
Unix, HP-UX Client (Version 10.x), Information Checklist, Procedure, Con the Client, GUI Method - specification
UPC - 095205742985
View all Xerox 4260S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Unix Unix HP-UX Client (Version 10.x) HP-UX workstations require specific installation steps to communicate with the machine. The machine is a BSD-style UNIX printer, whereas HP-UX is a System V-style UNIX. IMPORTANT: All UNIX commands are case sensitive, so enter the commands exactly as they are written. Information Checklist Before starting the installation procedure, please ensure that the following items are available and/or the tasks have been performed: 1. Existing operational network utilising the TCP/IP protocol. 2. Ensure that the machine is connected to the network. 3. Static IP Address for the machine. 4. Subnet Mask Address for the machine. 5. Gateway Address for the machine. 6. Host Name for the machine. Procedure 1. Follow the steps in Chapter 3, Configure Static IPv4 Addressing using the Machine User Interface, Procedure on page 14 until step 38, then return to this page. Configure the Client 1. Add the machine Host Name to the etc/hosts file on the HP-UX workstation. 2. Ensure that you can ping the machine from the HP-UX workstation. 3. Use either the GUI method or the tty methods as detailed below: GUI Method 1. Open a [Command] window from the Desktop. 2. Enter su to access Super User mode. 3. Enter sam to start the System Administrator Manager (SAM). 4. Click on the [Printers and Plotters] icon. 5. Click on [lp] spooler. 6. Click on [Printers and Plotters]. 7. Click on [Actions: Add Remote Printer/Plotter...]. 8. Enter the following information into the [Add Remote Printer/Plotter] form: Xerox WorkCentre 4250/4260 Series System Administration Guide 23