Xerox 4510B User Guide

Xerox 4510B - Phaser B/W Laser Printer Manual

Get Xerox 4510B - Phaser B/W Laser Printer PDF manuals and user guides
UPC - 095205431087
View all Xerox 4510B manuals
Add to My Manuals
Save this manual to your list of manuals

Xerox 4510B manual content summary:

  • Xerox 4510B | User Guide - Page 1
    Phaser® 4510 laser printer User Guide Guide d'utilisation Guida dell'utente Benutzerhandbuch Guía del usuario Guia do Usuário Gebruikershandleiding Användarhandbok Betjeningsvejledning www.xerox.com/support
  • Xerox 4510B | User Guide - Page 2
    from the software programs which are displayed on the screen such as styles, templates, icons, screen displays, looks, etc. XEROX®, CentreDirect®, CentreWare®, Phaser®, PhaserSMART®, PrintingScout™, and Walk-Up® are trademarks of Xerox Corporation in the United States and/or other countries. Adobe
  • Xerox 4510B | User Guide - Page 3
    the Printer's IP Address 2-5 Dynamic Methods of Setting the Printer's IP Address 2-6 Manually Setting the Printer's IP Address 2-7 Installing the Printer Drivers 2-9 Available Drivers 2-9 Windows 2000 or Later 2-10 Macintosh OS X, Version 10.3 and Higher 2-10 Phaser® 4510 Laser Printer i
  • Xerox 4510B | User Guide - Page 4
    25 Printing Transparencies 3-25 Printing Envelopes 3-32 Printing Labels 3-36 Printing Index Cards 3-41 Printing Custom Size Paper 3-43 Creating Custom Paper Types 3-45 4 Print Quality Controlling the Quality of Your Prints 4-2 Selecting a Print-Quality Mode 4-2 Phaser® 4510 Laser Printer ii
  • Xerox 4510B | User Guide - Page 5
    Tray 1, 2, 3, or 4 6-3 Jam at the Exit and Jam at the Rear 6-7 Jam at the Exit and Jam at the Rear (with Duplex Unit 6-9 Jam at the Exit - Open Top Cover to Clear 6-11 Jam at the Top Cover 6-13 Jam at the Duplex Unit 6-17 Jam at the Stacker 6-18 Paper Size Jam 6-20 Phaser® 4510 Laser Printer
  • Xerox 4510B | User Guide - Page 6
    Contents Getting Help 6-24 Control Panel Messages 6-24 PrintingScout Alerts 6-24 PhaserSMART Technical Support 6-25 Online Support Assistant 6-25 Web Links 6-26 A User Safety Index Phaser® 4510 Laser Printer iv
  • Xerox 4510B | User Guide - Page 7
    Printer Features This chapter includes: ■ Parts of the Printer on page 1-2 ■ Printer Configurations on page 1-4 ■ Control Panel on page 1-7 ■ More Information on page 1-10 Phaser® 4510 Laser Printer 1-1
  • Xerox 4510B | User Guide - Page 8
    on page 1-3 Front-Right View 1 2 3 4 5 6 7 1. Paper stop 2. Control panel 3. Tray 1 4. Power switch 5. Tray 2 6. Optional Tray 3 7. Optional Tray 4 8. Paper gauge 9. Print cartridge 10. Standard output tray 11. Optional 500-sheet stacker Parts of the Printer 11 10 9 8 4510-066 Phaser® 4510 Laser
  • Xerox 4510B | User Guide - Page 9
    connection 5. Power receptacle 6. Optional duplex unit 7. Rear cover 8. Stacker rear cover (Stacker is an option.) 9. Stacker extension Internal Components 2 1 Parts of the Printer 8 7 6 5 4510-067 3 1. Print cartridge 2. Transfer roller 3. Fuser unit 4510-094 Phaser® 4510 Laser Printer 1-3
  • Xerox 4510B | User Guide - Page 10
    43 pages per minute A4 ■ Fonts: PostScript and PCL ■ Tray 1 - 150-sheet tray Tray 2 - 550-sheet tray ■ Connection: ■ Parallel ■ USB ■ Ethernet 10/100 Base-Tx (available as upgrade on Phaser 4510B configuration) ■ 128 MB memory (expandable to 512 MB) ■ 10k print cartridge Phaser® 4510 Laser Printer
  • Xerox 4510B | User Guide - Page 11
    Configurations Available Configurations The Phaser 4510 printer is available in four standard configurations. Feature Printer Configurations 4510B 4510N 4510DT 4510DX Maximum Resolution True 1200 x 1200 True 1200 x 1200 True 1200 x 1200 True 1200 x 1200 Maximum Print Speed 45 ppm Letter
  • Xerox 4510B | User Guide - Page 12
    print jobs ■ Font storage ■ 128 MB and 256 MB memory cards (maximum of 512 MB installed memory in two slots) ■ 20 MB Flash Memory To order options for your Phaser 4510 Laser Printer, contact your local reseller or go to www.xerox.com/office/4510supplies. Upgrades To order the Phaser 4510B to 4510N
  • Xerox 4510B | User Guide - Page 13
    Print), printer errors, and warnings. ■ Prompts you to load paper, order and replace supplies, and clear jams. ■ Enables you to access tools and information pages to help resolve problems. ■ Enables you to change printer and network settings. ■ Enables you to access supply status. Phaser® 4510 Laser
  • Xerox 4510B | User Guide - Page 14
    4510 Control Panel 78 4510-068 1. Status Indicator LED: 5. Up Arrow button Green: Printer is ready to print. Scrolls upward through the menus. Yellow: Warning condition, printer continues to 6. Help (?) button print. Displays a help message with information Red: Startup sequence or error
  • Xerox 4510B | User Guide - Page 15
    the desired sample page, and then press the OK button to print. See also: Advanced Features Guide at www.xerox.com/office/4510support Power Saver Settings Factory Default: ■ Power Saver: On ■ Power Saver Timeout: 4 minutes You can change the default power saver time on the control panel or through
  • Xerox 4510B | User Guide - Page 16
    error messages on control panel Information pages * Also available on the Support website. Source Packaged with printer Packaged with printer Packaged with printer (Software and Documentation CD-ROM) Packaged with printer www.xerox.com/office/4510support www.xerox.com/office/4510support www.xerox
  • Xerox 4510B | User Guide - Page 17
    information: ■ User manuals and video tutorials ■ Solutions to troubleshooting problems ■ Printer and supplies status ■ Supplies ordering and recycling ■ Answers to frequently asked questions ■ Default printer driver settings (Windows only) To start the Xerox Support Centre utility: 1. Select
  • Xerox 4510B | User Guide - Page 18
    on page 2-3 ■ Configuring the Network Address on page 2-5 ■ Installing the Printer Drivers on page 2-9 ■ IPv6 on page 2-14 This chapter provides basic information about setting up and connecting to your printer. See also: Advanced Features Guide at www.xerox.com/office/4510support Phaser® 4510 Laser
  • Xerox 4510B | User Guide - Page 19
    in this chapter for the specific operating system you are using. Note: If the Software and Documentation CD-ROM is not available, you can download the latest driver from www.xerox.com/drivers. See also: Advanced Features Guide at www.xerox.com/office/4510support Phaser® 4510 Laser Printer 2-2
  • Xerox 4510B | User Guide - Page 20
    a hub, connect the computer to the hub with one cable, and then connect the printer to the hub with the second cable. Connect to any port on the hub except the uplink port. See also: Configuring the Network Address on page 2-5 Installing the Printer Drivers on page 2-9 Phaser® 4510 Laser Printer 2-3
  • Xerox 4510B | User Guide - Page 21
    must have Windows 2000/XP/ printer and the computer while they are both Off, and then turn them On. Install the printer driver from the Software and Documentation CD-ROM, and select the appropriate LPT Parallel port. See also: Installing the Printer Drivers on page 2-9 Phaser® 4510 Laser Printer
  • Xerox 4510B | User Guide - Page 22
    instructions, insert the Software and Documentation CD-ROM into your computer's CD-ROM drive. After the Xerox Installer launches, follow the prompts for installation. Note: For the automatic installer to function, the printer must be connected to an established TCP/IP network. Phaser® 4510 Laser
  • Xerox 4510B | User Guide - Page 23
    the browser's Address field (http://xxx.xxx.xxx.xxx). 3. Select Properties. 4. Select the Protocols folder on the left navigation panel. 5. Select TCP/IP. 6. In the BOOTP/DHCP Settings section, set the BOOTP/DHCP option to On or Off. 7. Click the Save Changes button. Phaser® 4510 Laser Printer 2-6
  • Xerox 4510B | User Guide - Page 24
    Required for Manual IP Addressing Information Internet Protocol (IP) address of the printer Network Mask Default Router/Gateway address Comments Format is xxx.xxx.xxx.xxx, where xxx represents a decimal number from 0-255. If you are unsure, leave this blank; the printer chooses an appropriate
  • Xerox 4510B | User Guide - Page 25
    on the left navigation panel. 5. Select TCP/IP. 6. Enter or modify the settings, and then click Save Changes at the bottom of the page. See also: Advanced Features Guide at www.xerox.com/office/4510support System Administrator Guide www.xerox.com/office/4510support Phaser® 4510 Laser Printer 2-8
  • Xerox 4510B | User Guide - Page 26
    locations and need to print to different printers. This driver enables printing from a Mac OS X (version 10.2 and higher) operating system. This driver enables printing from a UNIX operating system. * Go to www.xerox.com/drivers for the latest printer drivers. Phaser® 4510 Laser Printer 2-9
  • Xerox 4510B | User Guide - Page 27
    in the lower drop-down menu. 6. Select the appropriate printer model from the list of available devices. 7. Click the Add button. See also: Advanced Features Guide at www.xerox.com/office/4510support Online Support Assistant at www.xerox.com/office/4510support Phaser® 4510 Laser Printer 2-10
  • Xerox 4510B | User Guide - Page 28
    6. Enter the printer's IP address in the Printer Address field. 7. Verify that the Queue Name field is blank. 8. Select Xerox from the Printer Model pull-down menu, and then select the corresponding PPD file. 9. Click the Add button. The printer is added to the list. Phaser® 4510 Laser Printer 2-11
  • Xerox 4510B | User Guide - Page 29
    to Step 6. 6. Select Xerox from the manufacturers in the drop-down menu. 7. Select the appropriate printer configuration from the list of available printers. 8. Click the Add button. The printer is displayed as an available printer in the Printer Setup Utility. Phaser® 4510 Laser Printer 2-12
  • Xerox 4510B | User Guide - Page 30
    Utilities folder. 3. Click the Add button. 4. Select IP Printer from the upper left corner of the Printer Browser. 5. Select LPD from the pull-down menu. 6. Enter the printer's IP address in the Address field. 7. Click the Add button. The printer is added to the list. Phaser® 4510 Laser Printer 2-13
  • Xerox 4510B | User Guide - Page 31
    field. 3. Click Properties. 4. Select the Protocols folder on the left navigation panel, and then click TCP/IP. 5. Click the TCP/IP (v6) button. 6. Select the TCP/IP v6 Enabled check box to enable TCP/IP v6. 7. Click the Save Changes button at the bottom of the page. Phaser® 4510 Laser Printer 2-14
  • Xerox 4510B | User Guide - Page 32
    Protocols folder on the left navigation panel, and then click TCP/IP. 5. Click the TCP/IP (v6) button. 6. Do one of the following: ■ Select User Interface ID from MAC address. ■ Select Use this Interface ID. 7. Click the Save Changes button at the bottom of the page. Phaser® 4510 Laser Printer 2-15
  • Xerox 4510B | User Guide - Page 33
    's Address field. 3. Click Properties. 4. Select the Protocols folder on the left navigation panel, and then click TCP/IP. 5. Click the TCP/IP (v6) button. 6. Select/deselect Use router supplied prefixes. 7. Click the Save Changes button at the bottom of the page. Phaser® 4510 Laser Printer 2-16
  • Xerox 4510B | User Guide - Page 34
    values in a router advertisement. This is the default setting. ■ Always, for all configuration options ( panel, and then click TCP/IP. 5. Click the TCP/IP (v6) button. 6. Select/deselect the DHCPv6 options. 7. Click the Save Changes button at the bottom of the page. Phaser® 4510 Laser Printer
  • Xerox 4510B | User Guide - Page 35
    Select the Protocols folder on the left navigation panel, and then click TCP/IP. 5. Click the TCP/IP (v6) button. 6. In the Manual Address Assignment field, select Use this address, and then type the address. 7. Click the Save Changes button at the bottom of the page. Phaser® 4510 Laser Printer 2-18
  • Xerox 4510B | User Guide - Page 36
    types are available. IPv6 is the default setting. Address Precedence can only be set panel, and then click TCP/IP. 5. Click the TCP/IP (v6) button. 6. In the Address Precedence field, select the desired option. 7. Click the Save Changes button at the bottom of the page. Phaser® 4510 Laser Printer
  • Xerox 4510B | User Guide - Page 37
    This chapter includes: ■ Overview of Basic Steps on page 3-2 ■ Supported Paper and Media on page 3-3 ■ Loading Paper on page 3-7 ■ Selecting Printing Options on page 3-18 ■ Printing on Both Sides of the Paper on page 3-23 ■ Printing on Specialty Media on page 3-25 Phaser® 4510 Laser Printer 3-1
  • Xerox 4510B | User Guide - Page 38
    Print dialog box, and then select printing options in the printer driver. 5. Send the job to the printer from the software application's Print dialog box. See also: Loading Paper on page 3-7 Selecting Printing Options on page 3-18 Printing on Specialty Media on page 3-25 Phaser® 4510 Laser Printer
  • Xerox 4510B | User Guide - Page 39
    on page 3-5 ■ Supported Paper Sizes and Weights on page 3-5 Your printer is designed to be used with a variety of paper types. Follow the guidelines in this section to ensure the best print quality and to avoid jams. For best results, use Xerox printing media specified for your Phaser 4510 printer
  • Xerox 4510B | User Guide - Page 40
    Note: Printer reliability specifications may be affected by increased use of transparency, card stock, and labels. In addition, printer reliability may vary due to extended use of some media types. See also: Printing Transparencies on page 3-25 Printing Envelopes on page 3-32 Printing Labels on page
  • Xerox 4510B | User Guide - Page 41
    information about paper and other media, print the Paper Tips page: 1. On the control panel, select Information, and then press the OK button. 2. Select Information Pages, and then press the OK button. 3. Select Paper Tips Page, and then press the OK button to print. Phaser® 4510 Laser Printer 3-5
  • Xerox 4510B | User Guide - Page 42
    3.87 x 7.5 in. 4.12 x 9.5 in. 176 x 250 mm 162 x 229 mm 110 x 220 mm Custom Sizes Tray 1 Width: 76 - 216 mm (3.0 - 8.5 in.) Height: 127 - 356 mm (5.0 - 14 in.) Trays 2-4 Width: 98 - 216 mm (3.9 - 8.5 in.) Height: 148 - 356 mm (5.8 - 14 in.) Printable from Tray 1 only Phaser® 4510 Laser Printer 3-6
  • Xerox 4510B | User Guide - Page 43
    . Do not use envelopes with plastic windows or metal clasps. ■ Only use paper, transparencies, or specialty media that is flat. If frequent jamming occurs with card stock or heavier paper that is less than 175 mm (7 in.) long, reduce the number of sheets in the tray. Phaser® 4510 Laser Printer 3-7
  • Xerox 4510B | User Guide - Page 44
    in Tray 1 To load paper or other media in Tray 1: 1. Pull Tray 1 completely out of the printer. Loading Paper 4510-069 2. If loading paper having a different width or length, adjust the width and length guides. Adjusting Guides 4510-029 4510-030 Adjusting Guides Phaser® 4510 Laser Printer 3-8
  • Xerox 4510B | User Guide - Page 45
    of the tray and pushing in the front of the tray. Extending Tray Length 4510-071 Reducing Tray Length 4. Fan the paper to release sheets that are stuck together. 4510-072 5. Insert the paper into the tray, and adjust the paper guides to fit the paper. 4510-042 Phaser® 4510 Laser Printer 3-9
  • Xerox 4510B | User Guide - Page 46
    fill line. 4510-043 Caution: If you have to remove the cover to load the paper, replace the cover when you have finished loading. If the lid is not replaced, the paper might be misaligned and cause a paper jam. 6. Slide the guide firmly against the paper. 4510-070 Phaser® 4510 Laser Printer 3-10
  • Xerox 4510B | User Guide - Page 47
    then press the OK button. c. Select the paper size, and then press the OK button. See also: Paper Sizes and Weights for Trays 1-4 on page 3-6 Tray 1 Mode and Tray 2-N Mode on page 3-17 Printing on Specialty Media on page 3-25 Printing Custom Size Paper on page 3-43 Phaser® 4510 Laser Printer 3-11
  • Xerox 4510B | User Guide - Page 48
    card stock ■ Transparencies ■ Labels Note: Only Tray 1 can be used to print Index Card sized stock. See also: Loading Paper on page 3-7 Printing on Specialty Media on page 3-25 To load paper into Tray 2, 3, or 4: 1. Pull the tray completely out of the printer. 4510-089 Phaser® 4510 Laser Printer
  • Xerox 4510B | User Guide - Page 49
    tray and pulling out on the front of the tray. Reduce the tray by moving the release tabs to the sides of the tray and pushing in the front of the tray. Extending Tray 4510-075 4. Fan the paper to release sheets that are stuck together. Reducing Tray 4510-076 Phaser® 4510 Laser Printer 3-13
  • Xerox 4510B | User Guide - Page 50
    tray. Caution: Do not load paper above the fill line indicated on the tray. Overloading the tray may cause jams. The top fill line indicates the maximum fill line for paper. For more information on the tray fill lines, see Loading Paper Guidelines on page 3-7. 4510-078 Phaser® 4510 Laser Printer
  • Xerox 4510B | User Guide - Page 51
    is not replaced, the paper might be misaligned and cause a paper jam. 4510-100 7. If necessary, press the paper guides inward to fit the paper. 4510-074 Note: When the paper guides are adjusted correctly, there may be a small space between the paper and the guides. Phaser® 4510 Laser Printer 3-15
  • Xerox 4510B | User Guide - Page 52
    ■ Select the paper type from the list displayed, and then press the OK button. ■ Select the paper size, and then press the OK button. See also: Tray 1 Mode and Tray 2-N Mode on page 3-17 Printing on Specialty Media on page 3-25 Printing Custom Size Paper on page 3-43 Phaser® 4510 Laser Printer 3-16
  • Xerox 4510B | User Guide - Page 53
    panel. To print from a tray, the paper size and type of your print job must match the tray's paper size and type settings on the control panel. See also: Advanced Features Guide at www.xerox.com/office/4510support for additional information on Tray 1 Mode and Tray 2-N Mode Phaser® 4510 Laser Printer
  • Xerox 4510B | User Guide - Page 54
    page 3-20 ■ Restrictions on Printing on page 3-22 See also: Advanced Features Guide at www.xerox.com/office/4510support Factors Affecting Print Performance Many factors affect a print job. They include the print speed (stated in number of pages per minute), the media used, download time, and printer
  • Xerox 4510B | User Guide - Page 55
    your application, access the Print dialog box. 2. Select the Phaser 4510 printer and click its Properties button to open the printer driver. 3. Make selections from the driver tabs. See the following table for specific printing options. Note: In Windows 2000, Windows XP, and Windows Server 2003, you
  • Xerox 4510B | User Guide - Page 56
    screen to save the current printer settings. You can create multiple presets and save each with its own distinctive name and printer settings. To print jobs using specific printer settings, click the applicable saved preset in the Presets list. 3. Click Print to print the job. Phaser® 4510 Laser
  • Xerox 4510B | User Guide - Page 57
    ■ Paper types ■ Separation pages ■ Copies ■ Pages ■ Pages per sheet ■ Layout direction ■ Border ■ Two-sided printing ■ Copies ■ Pages ■ Cover pages ■ Paper source ■ Secure prints, personal prints, proof prints, and saved prints ■ Print quality ■ Image smoothing Phaser® 4510 Laser Printer 3-21
  • Xerox 4510B | User Guide - Page 58
    the use of the following printer features: ■ special job types ■ 1-sided printing ■ printing from a specific tray Usage of these features can -sided printing from your email application; the printer always prints multi-page email messages on both sides of the paper. Phaser® 4510 Laser Printer 3-22
  • Xerox 4510B | User Guide - Page 59
    The printer must have a duplex unit installed. The duplex hardware comes standard on the Phaser 4510DX and 4510DT configurations, and it is a option that is available for the Phaser 4510B and 4510N. ■ The paper must be a supported size for the tray. For a list of supported paper sizes, see Supported
  • Xerox 4510B | User Guide - Page 60
    Edge Mac OS X, version 10.2 and higher 1. In the Print dialog box, select Duplex. 2. Select Print on Both Sides. 3. Click the Binding icon that matches the edge to bind. See also: Loading Paper in Tray 1 on page 3-8 Loading Paper in Tray 2, 3, or 4 on page 3-12 Phaser® 4510 Laser Printer 3-24
  • Xerox 4510B | User Guide - Page 61
    /4510supplies. Guidelines ■ Remove all paper before loading transparencies in the tray. ■ Handle transparencies by the edges using both hands to avoid fingerprints and creases, which may cause poor print quality. ■ Fan transparencies before loading in the paper tray. Phaser® 4510 Laser Printer 3-25
  • Xerox 4510B | User Guide - Page 62
    Printing Transparencies from Tray 1 1. Remove Tray 1 from the printer by pulling out on the handle. 2. Remove the lid from the tray. 4510-069 4510-097 3. Remove all media from the tray. 4. Fan the transparencies to release sheets that are stuck together. 6360-047 Phaser® 4510 Laser Printer
  • Xerox 4510B | User Guide - Page 63
    for transparencies. 6. Adjust the paper guides to fit the transparencies. 4510-080 4510-081 4510-082 7. Replace the lid on the tray. Caution: The lid of the tray must be firmly closed. If not, the transparencies may become misaligned and cause a jam. 4510-099 Phaser® 4510 Laser Printer 3-27
  • Xerox 4510B | User Guide - Page 64
    then press the OK button. 10. In the printer driver, select either Transparency as the paper type or Tray 1 as the paper source. Printing Transparencies from Trays 2-4 1. Pull the tray that you want to load with transparencies completely out of the printer. 4510-089 Phaser® 4510 Laser Printer 3-28
  • Xerox 4510B | User Guide - Page 65
    Insert the transparencies into the tray. Caution: Do not load transparencies above the lower fill line indicated on the paper tray. Overloading the tray may cause jams. In the following illustration, 2 indicates the maximum fill line for transparencies. 1 2 4510-105 Phaser® 4510 Laser Printer 3-29
  • Xerox 4510B | User Guide - Page 66
    , the transparencies may become misaligned and cause a jam. 4510-100 7. If necessary, press the guides inward to fit the transparencies. Note: When the paper guides are adjusted correctly, there may be a small space between the transparencies and the guides. 4510-106 Phaser® 4510 Laser Printer 3-30
  • Xerox 4510B | User Guide - Page 67
    button. ■ Select Transparency from the list displayed, and then press the OK button. ■ Select the appropriate paper size, and then press the OK button. 10. In the printer driver, select either Transparency as the paper type or the appropriate tray as the paper source. Phaser® 4510 Laser Printer 3-31
  • Xerox 4510B | User Guide - Page 68
    Guarantee. The Total Satisfaction Guarantee is available in the United States and Canada. Coverage may vary outside these areas, please contact your local representative for details. Printing Envelopes from Tray 1 1. Pull Tray 1 completely out of the printer. 4510-069 Phaser® 4510 Laser Printer 3-32
  • Xerox 4510B | User Guide - Page 69
    in Tray 1 at any time. 4510-083 ■ For Monarch and DL envelopes, place the envelopes in the tray flap-side down with the top of the envelope entering first. 4510-107 3. Insert the tray into the tray slot, and push the tray completely into the printer. 4510-084 Phaser® 4510 Laser Printer 3-33
  • Xerox 4510B | User Guide - Page 70
    5. In the printer driver, select either Envelope as the paper type or Tray 1 as the paper source. Printing Envelopes from Trays 2-4 1. Pull the tray that you want to load with envelopes completely out of the printer. 4510-089 2. Insert the envelopes into the tray, and adjust the paper guides to fit
  • Xerox 4510B | User Guide - Page 71
    OK button. ■ Select Envelope from the list displayed, and then press the OK button. ■ Select the appropriate paper size, and then press the OK button. 5. In the printer driver, select either Envelope as the paper type or the tray you just loaded as the paper source. Phaser® 4510 Laser Printer 3-35
  • Xerox 4510B | User Guide - Page 72
    cause print-quality problems or cause them to jam in the printer. ■ Rotate stock frequently. Long periods of storage in extreme conditions can cause labels to curl and jam the printer. Printing Labels from Tray 1 1. Pull Tray 1 completely out of the printer. 4510-069 Phaser® 4510 Laser Printer 3-36
  • Xerox 4510B | User Guide - Page 73
    3. Fan the labels to release sheets that are stuck together. 4. Insert the labels into Tray 1, and adjust the paper guides to fit the sheets. ■ Place the side to be printed faceup with the top of the sheets entering first. ■ Do not load more than 100 sheets. 4510-087 Phaser® 4510 Laser Printer 3-37
  • Xerox 4510B | User Guide - Page 74
    : a. Select Change setup, and then press the OK button. b. Select Labels, and then press the OK button. c. Select the appropriate paper size, and then press the OK button. 8. In the printer driver, select either Labels as the paper type or Tray 1 as the paper source. Phaser® 4510 Laser Printer 3-38
  • Xerox 4510B | User Guide - Page 75
    Printing Labels from Trays 2-4 1. Pull the tray completely out of the printer. Printing on Specialty Media 2. Remove the lid from the tray. 4510-089 4510-098 3. Fan the labels to release sheets that are stuck together. Phaser® 4510 Laser Printer 3-39
  • Xerox 4510B | User Guide - Page 76
    the tray may cause jams. In the following illustration, 2 indicates the maximum fill line for labels. 1 2 3 4510-151 5. Replace the lid on the tray. Caution: The lid of the tray must be firmly closed. If not, the labels may become misaligned and cause a jam. 4510-109 Phaser® 4510 Laser Printer 3-40
  • Xerox 4510B | User Guide - Page 77
    . Printing Index Cards Index cards (3 in. x 5 in.) can be printed from Tray 1 only. Index cards can not be used for 2-sided printing. To order paper, transparencies, or other specialty media, contact your local reseller or go to www.xerox.com/office/4510supplies. Phaser® 4510 Laser Printer 3-41
  • Xerox 4510B | User Guide - Page 78
    toward the back of the tray. Do not load paper above the fill line indicated inside the tray. 4510-085 3. Adjust the paper guides to fit against the index cards. 4. Insert the tray into the printer tray slot and push it completely to the back of the printer. 4510-086 Phaser® 4510 Laser Printer 3-42
  • Xerox 4510B | User Guide - Page 79
    control panel, press the OK button if Index Card is displayed as the current setup, or select the paper type: a. Select Change setup, and then press the OK button. b. Select Index Card, and then press the OK button. 6. In the printer driver, select the appropriate tray or paper type. Printing Custom
  • Xerox 4510B | User Guide - Page 80
    or prepunched paper, place the first side to be printed faceup with the bottom of the page entering the printer first. 3. Insert the tray into the tray slot, and push the tray completely into the printer. 4510-044 4. On the control panel, select Change setup, and then press the OK button. 5. Select
  • Xerox 4510B | User Guide - Page 81
    navigation panel. 5. Select Custom Paper Types. 6. Enter or modify the settings, and then click Save Changes at the bottom of the page. Note: For more information about creating custom paper types, click the Help button on the Properties tab to view the online help. Phaser® 4510 Laser Printer 3-45
  • Xerox 4510B | User Guide - Page 82
    Print Quality This chapter includes: ■ Controlling the Quality of Your Prints on page 4-2 ■ Solving Print-Quality Problems on page 4-3 Phaser® 4510 Laser Printer 4-1
  • Xerox 4510B | User Guide - Page 83
    the paper type directly controls the print speed. You can change these settings in the printer driver or on the control panel. Note: Driver settings override the control panel settings. See also: Advanced Features Guide at www.xerox.com/office/4510support Selecting a Print-Quality Mode There are two
  • Xerox 4510B | User Guide - Page 84
    change the paper type and size on the control panel to match what is loaded in the tray. This section includes: ■ Light Prints on page 4-4 ■ Blank Prints on page 4-5 ■ Black Prints on page 4-6 ■ Horizontal Line Deletions on page 4-7 ■ Vertical Line Deletions on page 4-8 ■ Horizontal Dark Streaks
  • Xerox 4510B | User Guide - Page 85
    image is lighter than normal. Solving Print-Quality Problems Possible Causes The paper may be damp. You may be using Draft mode. The toner level may be low. Solutions Replace the paper. Turn off Draft mode. If the print cartridge is low on toner, replace it. Phaser® 4510 Laser Printer 4-4
  • Xerox 4510B | User Guide - Page 86
    cable between the computer and printer, the printer setup, and application software. ■ If the Configuration page is blank, replace the print cartridge then reprint the Configuration page. If the Configuration page still is blank, contact your Customer Support Center. Phaser® 4510 Laser Printer 4-5
  • Xerox 4510B | User Guide - Page 87
    Replace the print cartridge. Print a Configuration page. ■ If the Configuration page prints correctly, check the interface cable between the computer and the printer, and the application software. ■ If the connections appear normal, contact your Customer Support Center. Phaser® 4510 Laser Printer
  • Xerox 4510B | User Guide - Page 88
    cartridge may not be installed correctly. Remove and re-install the print cartridge. The print cartridge may be defective or at the end Replace the print cartridge. of its life. The transfer roller may be defective. Replace the transfer roller (in the maintenance kit). Phaser® 4510 Laser Printer
  • Xerox 4510B | User Guide - Page 89
    Solutions The paper may be defective with creases, folds, etc. The print cartridge may be defective or at the end of its life. The transfer roller may be defective. Replace the paper. Replace the print cartridge. Replace the transfer roller (in the maintenance kit). Phaser® 4510 Laser Printer 4-8
  • Xerox 4510B | User Guide - Page 90
    may be defective or at the end of its life. The paper path may be contaminated with toner. The fuser may be defective. Replace the print cartridge. Print several blank sheets of paper to remove the toner accumulations. Replace the fuser (in the maintenance kit). Phaser® 4510 Laser Printer 4-9
  • Xerox 4510B | User Guide - Page 91
    be contaminated with toner. Print several blank sheets of paper to remove the toner accumulations. The print cartridge may be defective or at the end Replace the print cartridge. of its life. The fuser may be defective. Replace the fuser (in the maintenance kit). Phaser® 4510 Laser Printer 4-10
  • Xerox 4510B | User Guide - Page 92
    . The fuser may be defective. The transfer roller may be defective. Print several blank sheets of paper to remove the toner accumulations. Replace the print cartridge. Replace the fuser (in the maintenance kit). Replace the transfer roller (in the maintenance kit). Phaser® 4510 Laser Printer 4-11
  • Xerox 4510B | User Guide - Page 93
    in an environment with the temperature between 5° and 35° C (41° and 95° F) and the relative humidity between 15% and 85%. Move the printer to a suitable area, away from air conditioning vents, open loading docks, etc. Replace the fuser (in the maintenance kit). Phaser® 4510 Laser Printer 4-12
  • Xerox 4510B | User Guide - Page 94
    paper may be in poor condition. The paper may be damp. The fuser may be at the end of its life. Solutions Verify that the paper is correctly loaded in the appropriate tray. Replace the paper. Replace the paper. Replace the fuser (contained in the maintenance kit). Phaser® 4510 Laser Printer 4-13
  • Xerox 4510B | User Guide - Page 95
    of the print are extremely light or missing. Possible Causes Solutions The paper may be in poor condition. The paper may be damp. The print cartridge may be defective or at the end of its life. Replace the paper. Replace the paper. Replace the print cartridge. Phaser® 4510 Laser Printer 4-14
  • Xerox 4510B | User Guide - Page 96
    b. Reinstall the original print cartridge. c. Replace the maintenance kit (fuser and transfer roller). 3. If the problem continues, contact your Customer Support Center. To order Xerox supplies, contact your local reseller or go to www.xerox.com/office/ 4510supplies. Phaser® 4510 Laser Printer 4-15
  • Xerox 4510B | User Guide - Page 97
    Address field (http://xxx.xxx.xxx.xxx). 3. Click Properties. 4. Select General on the left navigation panel, and then select Fuser. 5. Use the appropriate media drop-down list to change the fuser temperature. 6. Click the Save Changes button at the bottom of the page. Phaser® 4510 Laser Printer 4-16
  • Xerox 4510B | User Guide - Page 98
    press the OK button. e. Select the appropriate tray to calibrate, and then press the OK button. f. Follow the instructions on the Calibrate Margins page. Note: The leading edge margin specification is 4 mm ± 2 mm. The side edge margin specification is 4 mm ± 2.5 mm Phaser® 4510 Laser Printer 4-17
  • Xerox 4510B | User Guide - Page 99
    Maintenance This chapter includes: ■ Cleaning the Printer on page 5-2 ■ Ordering Supplies on page 5-5 ■ Extended Periods of Non-Use on page 5-7 ■ Moving and Repacking the Printer on page 5-8 Phaser® 4510 Laser Printer 5-1
  • Xerox 4510B | User Guide - Page 100
    toner vacuum to clean the printer. Do not lubricate the printer with oil. Cleaning the Feed Roller Use this procedure to clean the feed roller if you encounter problems with the paper feeding incorrectly from the tray. 1. Pull the tray completely out of the printer. 4510-069 Phaser® 4510 Laser
  • Xerox 4510B | User Guide - Page 101
    the feed roll from the paper tray shaft. a. Push down on the shaft of the feed roll (1), and then widen the tab of the feed roll to loosen it (2). b. Remove the feed roll from the paper tray shaft (3). 1 3 2 3. Clean the rollers with a damp cloth. 4510-116 4510-117 Phaser® 4510 Laser Printer
  • Xerox 4510B | User Guide - Page 102
    the Printer 4. Reinsert the feed roll on the paper tray shaft. 5. Align the tabs on the feed roll with the slots on the shaft (1), and then push the feed roll completely onto the shaft (2). 1 2 6. Push the paper tray back into the printer. 4510-118 4510-044 Phaser® 4510 Laser Printer 5-4
  • Xerox 4510B | User Guide - Page 103
    replaceable. The only routine maintenance item for the Phaser 4510 Laser Printer is the maintenance kit. Access the Supplies Info menu on the control panel to see the remaining life of the maintenance kit. The maintenance kit contains: ■ Fuser ■ Transfer roller ■ 12 feed rollers Phaser® 4510 Laser
  • Xerox 4510B | User Guide - Page 104
    first appear to avoid interruptions to your printing. The control panel displays an error message when the supply must be replaced. To view the current status of your printer supplies, print the Supplies Usage page: 1. On the control panel, select Information, and then press the OK button. 2. Select
  • Xerox 4510B | User Guide - Page 105
    : Due to the risk of electric shock, you should not touch the power cord with wet hands. For additional safety information, see User Safety on page A-1. 3. Empty all paper trays, and store the media in a location free of humidity and dust. Phaser® 4510 Laser Printer 5-7
  • Xerox 4510B | User Guide - Page 106
    printer. Preparing the Printer for Shipment Caution: The print cartridge must be removed before shipping the printer. Repack the print cartridge in a plastic bag, and seal the bag. Repack the printer using the original packing material and boxes or a Xerox repackaging kit. Additional instructions
  • Xerox 4510B | User Guide - Page 107
    Troubleshooting This chapter includes: ■ Clearing Paper Jams on page 6-2 ■ Getting Help on page 6-24 See also: Print Quality on page 4-1 Cleaning the Feed Roller on page 5-2 Phaser® 4510 Laser Printer 6-1
  • Xerox 4510B | User Guide - Page 108
    Jams To reduce the occurrence of paper jams, follow the guidelines and instructions in the Printing Basics chapter in this guide. It includes information about supported paper and media, guides for usage, and instructions for properly loading paper in the trays. Phaser® 4510 Laser Printer 6-2
  • Xerox 4510B | User Guide - Page 109
    the specified tray and all trays above it. For example, if the jam is at Tray 3, pull out Trays 1, 2, and 3. If you have a jam at Tray 2, pull out Tray 2 only. If you have a jam at Tray 1, pull out Trays 1 and 2. It is not necessary to pull out all the trays. 4510-036 Phaser® 4510 Laser Printer 6-3
  • Xerox 4510B | User Guide - Page 110
    2. Pull jammed paper from the printer tray slot. Clearing Paper Jams 3. Remove crumpled paper from the tray. 4510-037 4510-038 4. If you have a stacker, remove paper from the stacker, and then lift the stacker tray. 4510-005 4510-006 Phaser® 4510 Laser Printer 6-4
  • Xerox 4510B | User Guide - Page 111
    5. Open the top cover. Clearing Paper Jams 6. Remove the print cartridge. 4510-007 4510-122 7. Remove the jammed paper. Confirm that all paper fragments are removed. 4510-127 Phaser® 4510 Laser Printer 6-5
  • Xerox 4510B | User Guide - Page 112
    8. Insert the print cartridge. Clearing Paper Jams 9. Replace all the trays. 4510-123 10. Close the top cover. 4510-145 4510-004 Phaser® 4510 Laser Printer 6-6
  • Xerox 4510B | User Guide - Page 113
    exit or at the rear cover. On the control panel of the printer, press the Help (?) button to view information about the control panel message. To clear the jam: 1. Open the rear cover. Warning: Be careful, some components inside the rear cover may be hot. 4510-020 Phaser® 4510 Laser Printer 6-7
  • Xerox 4510B | User Guide - Page 114
    . 4510-021 3. If you did not find jammed paper in Step 2, open the fuser exit cover and pull the jammed paper completely out of the printer. 4510-022 Note: When you let go of the fuser exit cover it will return to it's original position. 4. Close the rear cover. 4510-002 Phaser® 4510 Laser Printer
  • Xerox 4510B | User Guide - Page 115
    control panel of the printer, press the Help (?) button to view information about the control panel message. To clear the jam: 1. Open the duplex unit cover. 4510-018 2. Open the rear cover. Warning: Be careful, some components inside the rear cover may be hot. 4510-023 Phaser® 4510 Laser Printer
  • Xerox 4510B | User Guide - Page 116
    . 4510-024 4. If you do not find jammed paper in Step 3, open the fuser exit cover and pull the jammed paper completely out of the printer. 4510-025 Note: When you let go of the fuser exit cover it will return to it's original position. 5. Close the rear cover. 4510-026 Phaser® 4510 Laser Printer
  • Xerox 4510B | User Guide - Page 117
    6. Close the duplex unit cover. Clearing Paper Jams 4510-001 Jam at the Exit - Open Top Cover to Clear There is a jam at the exit or at the rear cover. On the control panel of the printer, press the Help (?) button to view information about the control panel message. To clear the jam: 1. If you
  • Xerox 4510B | User Guide - Page 118
    Clearing Paper Jams 2. Remove the jammed paper from the exit. Confirm that all paper fragments are removed. 3. Open the top cover. 4. Close the top cover. 4510-027 4510-007 4510-004 Phaser® 4510 Laser Printer 6-12
  • Xerox 4510B | User Guide - Page 119
    control panel of the printer, press the Help (?) button to view information about the control panel message. To clear the jam: 1. If you have a stacker, remove paper from the stacker, and then raise the stacker tray. 2. Open the top cover. 4510-005 4510-006 4510-007 Phaser® 4510 Laser Printer
  • Xerox 4510B | User Guide - Page 120
    print cartridge. Clearing Paper Jams 4510-122 4. Turn the green roller to move the jammed paper out of the rollers, and then gently pull the jammed paper out of the rollers. 4510-033 5. If you cannot move the jammed paper, pull Trays 1 and 2 completely out of the printer. 4510-034 Phaser® 4510
  • Xerox 4510B | User Guide - Page 121
    Clearing Paper Jams 6. Turn the green roller and remove the jammed paper. Confirm that all paper fragments are removed. 7. Replace the trays. 4510-033 8. Reinsert the print cartridge. 4510-035 4510-123 Phaser® 4510 Laser Printer 6-15
  • Xerox 4510B | User Guide - Page 122
    9. Close the top cover. Clearing Paper Jams 10. If you have a stacker, lower the stacker tray. 4510-004 4510-010 Phaser® 4510 Laser Printer 6-16
  • Xerox 4510B | User Guide - Page 123
    rear cover. On the control panel of the printer, press the Help (?) button to view information about the control panel message. To clear the jam: 1. Open the duplex unit cover. 4510-018 2. Remove the jammed paper. Confirm that all paper fragments are removed. 4510-019 Phaser® 4510 Laser Printer 6-17
  • Xerox 4510B | User Guide - Page 124
    the duplex unit. Clearing Paper Jams 4510-001 Jam at the Stacker There is a jam at the exit or at the rear cover. On the control panel of the printer, press the Help (?) button to view information about the control panel message. To clear the jam: 1. Open the rear stacker cover. 4510-031 Phaser
  • Xerox 4510B | User Guide - Page 125
    Clearing Paper Jams 2. Remove the jammed paper. Confirm that all paper fragments are removed. 3. Close the rear stacker cover. 4510-032 4510-003 Phaser® 4510 Laser Printer 6-19
  • Xerox 4510B | User Guide - Page 126
    panel of the printer, press the Help (?) button to view information about the control panel message. To clear the jam: 1. Pull the tray completely out of the printer. 4510-028 2. Confirm that the paper tray guides are pressed firmly against the paper. 4510-029 4510-030 Phaser® 4510 Laser Printer
  • Xerox 4510B | User Guide - Page 127
    4. If the control panel prompts you: ■ If you haven't changed the type of paper, press the OK button. ■ If you have changed the type of paper, scroll to the correct paper type and press the OK button. 5. If you have a duplex unit, open the duplex unit cover. 4510-018 Phaser® 4510 Laser Printer 6-21
  • Xerox 4510B | User Guide - Page 128
    Clearing Paper Jams 6. Open the rear cover. Warning: Be careful, some components inside the rear cover may be hot. 4510-020 7. Remove the jammed paper. Confirm that all paper fragments are removed. 8. Close the rear cover. 4510-021 4510-002 Phaser® 4510 Laser Printer 6-22
  • Xerox 4510B | User Guide - Page 129
    9. If you have a duplex unit, close the duplex unit cover. Clearing Paper Jams 4510-001 Phaser® 4510 Laser Printer 6-23
  • Xerox 4510B | User Guide - Page 130
    produce and maintain print quality. See also: Xerox Support Centre on page 1-11 Control Panel Messages The control panel provides you with information and troubleshooting help. When an error or warning condition occurs, the control panel displays a message informing you of the problem. In many cases
  • Xerox 4510B | User Guide - Page 131
    base that provides instructions and troubleshooting help to solve your printer problems. You can find solutions for print quality, media jams, software installation, and much more. To access the Online Support Assistant, go to www.xerox.com/office/4510support. Phaser® 4510 Laser Printer 6-25
  • Xerox 4510B | User Guide - Page 132
    .com www.xerox.com/office/4510support www.xerox.com/office/4510supplies www.colorconnection.xerox.com www.xerox.com/office/contacts www.xerox.com/office/register www.xerox.com/msds (U.S. and Canada) www.xerox.com/environment_europe (European Union) www.xerox.com/gwa Phaser® 4510 Laser Printer
  • Xerox 4510B | User Guide - Page 133
    to prevent overheating of the printer. ■ Do not drop paper clips or staples into the printer. Warning: Do not push objects into slots or openings on the printer. Making contact with a voltage point or shorting out a part could result in fire or electrical shock. Phaser® 4510 Laser Printer A-1
  • Xerox 4510B | User Guide - Page 134
    are installing optional equipment and are specifically instructed to do so. Power should be OFF when performing these installations. Except for user-installable options, there are no parts that you can maintain or service behind these covers. Note: Leave the printer on for optimum performance; it
  • Xerox 4510B | User Guide - Page 135
    above the printer Total Height Requirements: ■ Printer: 820 mm (32 in.) Other Clearances: ■ 109 mm (4.3 in.) behind the printer ■ 480 mm (19 in.) in front of the printer ■ 210 mm (8 in.) on the left side of the printer ■ 300 mm (12 in.) on the right side of the printer Phaser® 4510 Laser Printer A-3
  • Xerox 4510B | User Guide - Page 136
    the exit and feed rollers. When the printer is printing: ■ Do not remove the paper source tray that you selected in either the printer driver or control panel. ■ Do not open the doors. ■ Do not move the printer. Printer Supplies ■ Use the supplies specifically designed for your printer. The use of
  • Xerox 4510B | User Guide - Page 137
    to avoid injuring yourself or damaging the printer: ■ Turn off the printer and unplug all power cables before moving the printer. 4510-011 ■ Always use two people to lift the printer. ■ Always lift the printer from the designated lift points. 21 kg 45 lb. 4510-093 Phaser® 4510 Laser Printer A-5
  • Xerox 4510B | User Guide - Page 138
    a particular component). See the manual(s) for information. Hot surface on or in the printer. Use caution to avoid personal injury. Do not touch the item. Do not burn the item. It may take 30 minutes or more for the fuser to cool down depending on your printer model. Phaser® 4510 Laser Printer A-6
  • Xerox 4510B | User Guide - Page 139
    on the market. For disposal information, contact your local authorities. Perchlorate Material - This product may contain one or more Perchlorate-containing devices, such as batteries. Special handling may apply, please see www.dtsc.ca.gov/hazardouswaste/perchlorate. Phaser® 4510 Laser Printer A-7
  • Xerox 4510B | User Guide - Page 140
    , 2-9 Macintosh OS X version 10.3, 2-10 Macintosh OS X version 10.4, 2-12 PCL, 2-9 PostScript, 2-9 selecting 2-sided printing, 3-24 UNIX, 2-9 Windows 2000 or later, 2-10 Xerox Support Centre, 1-11 duplex unit closing cover, 6-23 opening cover, 6-21 paper jam, 6-17 Phaser® 4510 Laser Printer Index-1
  • Xerox 4510B | User Guide - Page 141
    on the printer, 2-6 envelopes, 3-32 guidelines, 3-32 printing from Tray 1, 3-32 error and warning messages, 6-24 Ethernet connection, 2-3 F features printer configurations, 1-5 standard, 1-4 feed roller cleaning, 5-2 fill lines Tray 1 and Trays 2-4, 3-7 G getting help, 6-24 Online Support Assistant
  • Xerox 4510B | User Guide - Page 142
    safety, 5-8, A-3 maintenance kit, 5-5 manually setting the printer's IP address, 2-7 overrides AutoIP, 2-7 overrides DHCP, 2-7 margins printed area does not fit on the paper, 4-17 maximum resolution (dpi), 1-4 media supported, 3-3 unacceptable types, 3-4 Menu Map, 1-8 messages control panel, 6-24
  • Xerox 4510B | User Guide - Page 143
    , 6-13 clearing, 6-2 duplex unit, 6-17 exit and rear (with duplex unit), 6-9 jam at Tray 1, 2, 3, or 4, 6-3 paper size, 6-20 preventing, 6-2 paper tray guides adjusting, 6-20 parts of the printer, 1-2 PCL, 2-9 fonts, 1-4 performance factors affecting, 3-18 PhaserSMART technical support, 1-10, 6-25
  • Xerox 4510B | User Guide - Page 144
    6-11, 6-13 lowering, 6-13, 6-16 opening rear stacker cover, 6-18 supplies, A-4 ordering, 5-5 recycling, 5-6 when to order, 5-6 Support Centre, 1-11 supported paper and media, 3-3 supported paper sizes and weights, 3-5 Trays 1-4, 3-6 symbols marked on product, A-6 Phaser® 4510 Laser Printer Index-5
  • Xerox 4510B | User Guide - Page 145
    Windows 2000 or later, 2-10 printing options, 3-19 selecting printing options for an individual job, 3-19 Xerox Support Centre, 1-11 Windows PostScript driver, 2-9 X Xerox supplies recycling programs, 5-6 supplies website, 5-6 Support Centre, 1-11 website resources, 6-26 Phaser® 4510 Laser Printer
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
Betjeningsvejledning
Användarhandbok
Gebruikershandleiding
Guia do Usuário
Guía del usuario
Benutzerhandbuch
Guida dell'utente
Guide d’utilisation
User Guide
www.xerox.com/support
Phaser
®
4510
laser printer