Xerox 4510B User Guide - Page 81
Creating Custom Paper Types, Up Arrow, Down Arrow, Address, Properties, General, Custom Paper Types
UPC - 095205431087
View all Xerox 4510B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Printing on Specialty Media 7. If you selected New Custom Size, select the custom width and height: a. For Short Edge, use the Up Arrow and Down Arrow buttons to specify the short edge, and then press the OK button. b. For Long Edge, use the Up Arrow and Down Arrow buttons to specify the long edge, and then press the OK button. c. If the control panel prompts you for the Paper Orientation, use the Up Arrow and Down Arrow buttons to select the direction you are feeding the paper into the tray. Long-Edge Feed 4510-114 Short-Edge Feed 4510-113 Note: When you define a new custom size, it is stored in the printer so it can be used again. Up to five custom sizes can be stored in the printer. If you define a new custom size after five custom sizes have been stored, the new custom size replaces the least recently used. 8. Either use the custom size as the document size in the application or select the appropriate tray as the paper source. Creating Custom Paper Types Custom paper types are created in CentreWare IS and appear in the printer driver, control panel, and CentreWare IS. Use this feature to create your own custom paper type with specific settings that you can reuse for routine print jobs, for example, monthly reports. To create custom paper types: 1. Launch your web browser. 2. Enter the printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx). 3. Click Properties. 4. Select the General folder on the left navigation panel. 5. Select Custom Paper Types. 6. Enter or modify the settings, and then click Save Changes at the bottom of the page. Note: For more information about creating custom paper types, click the Help button on the Properties tab to view the online help. Phaser® 4510 Laser Printer 3-45