Xerox 850DX Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction
Xerox 850DX - Phaser Color Solid Ink Printer Manual
UPC - 042215454865
View all Xerox 850DX manuals
Add to My Manuals
Save this manual to your list of manuals |
Xerox 850DX manual content summary:
- Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 1
XES Synergix™ 8825/8830/8850/8855 & X2-Tech System Introduction 701P37895 March 2002 - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 2
This page left intentionally blank. - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 3
interference in which case the user may be required to take adequate measures. Changes or modifications to this equipment, not specifically approved by Xerox Europe, may void the user's authority to operate this equipment. Shielded cables must be used with this equipment to maintain compliance with - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 4
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 5
Digital Solution, XES Synergix 8830 and 8830 Digital Solution, XES Synergix Scan System, the digital box icon, AccXES, and the acronym XES are trademarks of XEROX Corporation. Windows NT®, Windows® 95, Windows® 98, and Windows® 2000 are registered trademarks of Microsoft - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 6
you call: Customer Account Name: Customer Account Number: Machine Type: 8825/8830/8850/8855 Printer Printer Serial Number: FOR SERVICE ON YOUR Printer: Local Phone Number: A Customer Service Support Representative will assist you in keeping your Printer operating and, if required, will arrange for - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 7
Printer 6 8855 Digital Solution 6 X2-TECH System Capabilities 8 Optional On-line Folders 9 Optional Stacker 1000 10 Getting Started 11 Quick Start Procedures 11 User Guide References for Additional Information 12 Overview of Digital Solution Manuals Color Printing with the HP-GL/2 Driver 19 - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 8
Synergix 8825/8830/8850/8855 & X2-TECH System Introduction vi PRINTER PEN SETTINGS Test Print 40 8825/8830/8850 Printer Control Panel Displayed Error Codes ... 42 8855 Printer Displayed Error Codes 44 X2-TECH LCD-Displayed Error Codes 45 8855 & X2-TECH Controller Status LEDs 46 Scanner Control - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 9
port activity, supports multiple data formats with auto data format recognition, and offers several customer installable options. The Controller maximizes the capabilities of the printer by driving it at full speed, which improves your productivity. Additionally, a number of print drivers and client - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 10
-in manual bypass supports cut sheet media printer can be equipped with a programmable On-line Folder, or Xerox Stacker with print-stacking capabilities of up to 500 E size prints Print Drivers, the AccXES Client Tools, and Web Printer Manager Tool, scanned documents may be previewed, retrieved, printed - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 11
36" wide and the 54" wide formats support 2 rolls of media in a variety of types that have been optimized for color printing, and are selectable from print drivers, the Document Submit Tool of the Access Client Tools, or from the Media Page of the Web Printer Manager Tool. The rated output speeds of - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 12
using the AccXES Client Tool's Document Submit Tool. 4 • View the print queue, cancel print jobs, and change printer defaults remotely with the Web Printer Manager Tool, or by using the AccXES Client Tool's Printer Queue Tool. Optional Controller Optional Controller 0301001B-WHG Figure 1. The - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 13
8825/8830/8850 System Capabilities (continued) XES Synergix Scan System XES Synergix 8850 Printer Figure 2. A Digital Solution is comprised of an 8825 printer, with EV4 Controller, or 8830/8850 printer, with CNG Controller, and an XES Synergix Scan System. XES Synergix 8825/8830/8850/8855 & X2- - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 14
. • Create sets of documents, send or cancel print jobs, and view the printer queue from remote workstations with the AccXES Client Tools. • View the printer queue, cancel print jobs, and change printer defaults remotely with the Web Printer Manager Tool. 8855 Digital Solution Copy, collate, and - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 15
8855 System Capabilities (continued) XES Synergix 8825/8830/8850/8855 & X2-TECH System Introduction Figure 4. A Digital Solution is comprised of an 8855 printer, with UP8 Controller and an XES Synergix Scan System. 7 - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 16
print jobs, and view the printer queue from remote workstations with the AccXES Client Tools. • Effective with Firmware 7.5, an optional Color ) Menu enables you to select the Media Types supported by your printer. After selecting a supported Media Type, the Media Mismatch Mode parameters for that - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 17
can be used with the XES Synergix 8825/8830/8850/8855 Engineering Printer or Digital Solution. The default finishing options are controlled from your , then the Finishing Tab. NOTE: The X2-TECH Digital Solution does not support folding (finishing) at this time. XES Synergix 8825/8830/8850/8855 & - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 18
through E (A0). Ideal for use with the XES Synergix 8855 Printer or XES Synergix 8855 Digital Solution, the stacking capacity of the Optional Xerox Stacker is 500 E size bond prints. Tray extensions (for longersize prints) Figure 6. Xerox Stacker 1000 Media storage compartment (one on each side of - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 19
Quick Start Procedures are included in this section: 8825 Printer 8830 Printer 8850 Printer Quick Start for Document Copying Quick Start for Remote X X X Desktop Printing Quick Start for printing to the X2-TECH color printer Quick Start for Scanning to your Network Quick Start for - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 20
X2 User Guide Provides a description of the X2 printer, instructions for replacing ink bottles, instructions for loading and removing media, instructions for jam clearance, and troubleshooting tips. XES Synergix 8855 & X2-TECH Controller Setup Manual for Firmware 8.0 This manual describes the - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 21
X2-TECH Digital Solution. XES Synergix & X2-TECH Digital Solution Participant Guide A self-paced training guide for the Digital Solution. AccXES Software Tools Participant's Guide The Web Printer Manager Tool (WebPMT), print drivers, Scan-to-Net, Document Submission Tool, Document Retrieve Tool, and - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 22
14 Digital Solution Manuals (continued) XES Synergix 8825/8830/8850/8855 Windows NT4.0 PostScript Print Driver User Guide XES Synergix 8825/8830/8850/8855 Windows 2000 PostScript Print Driver User Guide XES Synergix 8825/8830/8850/8855 HDI AutoCAD 2000 Print Driver User Guide XES Synergix 8825 - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 23
supported by the X2-TECH system. • Make sure that media is loaded into all drawers of the XES Synergix 8825, 8830, 8850, or 8855 Printer. For full details on loading the roll media, go to the 8825/8830/8850 or 8855 Printer Operator Manual printer and your copy will be automatically printed User Guide. - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 24
on your workstation. For full details go to the applicable Print Driver User Manual. • Install the AccXES Client Tools software on your workstation. For full details go to the AccXES Client Tools 8.0 User Guide. • Connect to the Web Printer Manager Tool on your workstation. This is done through - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 25
. • On the Document Submit Tab, add a file and send it to the printer, as a test that you are connected to the printer. See the previous section in this guide, entitled Printing from Your Desktop, for printing instructions. • Use the scanner's Mode button to select Scan Mode. • Use the keypad - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 26
Operating System on your workstation. Select the X2-TECH color printer from the displayed list of printers during driver installation. For full installation details refer to the XES Synergix 8825/8830/8850/8855 HP GL/2 & HP RTL Print Driver User Guide. Figure 9. Typical Main Page of the Web PMT - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 27
the Document Properties Dialog, make any other selections deemed appropriate. Note that "Manual Feed," for inserting a cut sheet of media, and "Finishing," for folding printed media, are not supported by the X2-TECH printer. 4. Click OK to save all settings and close the Document Properties dialog - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 28
color in TIFF and JPEG formats. The printing of JPEG files is also enabled in Firmware Release 7.5. Scanning to Net • 8825/8830/8850 Digital Solution: If necessary, power on the Scanner/Controller Circuit Breaker/Printer. Configuration refer to the XES Synergix & X2-TECH Digital Solution User Guide. - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 29
to the XES Synergix & X2-TECH Digital Solution User Guide. READY TO SCAN INSERT DOCUMENT AUTO 100.0% Menu Previous Next Enter Exit Mode Batch Transform Sample Sets Build Finisher Store/ Recall Printer Interrupt A D 1 2 B C 3 E F 4 G H I 5 J K L 6 M N O 7 - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 30
XES Synergix 8825/8830/8850/8855 & X2-TECH System Introduction 22 Quick Start for Scanning to Net (continued) Retrieving Scanned Documents • With the AccXES Client Tools running on your workstation, select the Document Retrieve Tab. • In the Scan Directory field, type in the 16 alphanumeric - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 31
in the Directory field. • See the "Using the Document Retrieval Tool" section of the AccXES Client Tools 8.0 User Guide for more Quick Start details. New with 7.5, a dropdown menu enables Color Scan-to-Net users to select the file extension to use for retrieved JPEG files. Figure 12. Typical - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 32
with Firmware 7.5, the recording of printing, copying and scanning activities (media to have your System Administrator use the Web Printer Manager Tool or Printer Control Panel to check the setting of the Printer. Failure to provide valid IDs will result in denial of services or the printing of an - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 33
Plot Nesting efficiently groups the printing of multiple images onto a single piece of media to eliminate media waste. Plot nesting parameters can be set with the AccXES Client Tools, with the Web Printer Manager Tool, or with the XES Synergix 8825/8830/8850 Printer Control Panel as described in - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 34
printer's IP address. If you don't know the printer's IP address, see your System Administrator or the test print set produced at the time of your printer a Status Area and a Job Queue List. If you need to change any of the printer's default parameters, you must first enter the printer password on - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 35
Quick Start for Plot Nesting (continued) Accessing Plot Nesting Parameters 1. Click on the PRINTER DEFAULTS hypertext link. 2. Click on the PRINTER SETUP group of the Printer Defaults Side Menu and the PRINTER SETUP menu will expand to show the subgroup menu items and display the top page of the - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 36
one specific job source. The factory default setting is Off. Timeout - In this text box, enter the maximum idle time (in seconds) for the printer to wait after processing a print job, before printing and cutting a nested page. The factory default is 5 seconds. Margins - In this text box, enter the - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 37
Start for Plot Nesting (continued) Setting Nesting Parameters with the 8825/8830/8850 Printer Control Panel • Press on the Control Panel to take the printer off-line. Press Enter. • Press the Next key until SETUP PRINTER is displayed. Press the Enter key to confirm the choice. • Press the Next - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 38
the applicable Print Driver User Guide. Note: Drivers and their accompanying User Guides are available on the Internet at www.xes.com. Using the Web PMT Conveniently accessed from your workstation using your Web browser, the Web PMT functions as an electronic Control Panel for the Printer. If you - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 39
that you add to the Document Submit window, even if you open a saved document set. Go to the "Default Document Print Options" section of the AccXES Client Tools 8.0 User Guide for more details. Figure 14. Document Submit Tool • Create a set of documents by using the Add or Insert toolbar buttons - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 40
. These changes will be applied only to the selected documents in the Document Submit window. Go to the "Document Print Options" section of the AccXES Client Tools 8.0 User Guide for more details. JOB OPTIONS Select this toolbar button to access the job option tabs. These options will apply to - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 41
on Copies, Collation and Finishing Settings IMPORTANT NOTE: The PostScript language supports the ability to modify the number of copies, collation, and for the job and behave according to the PostScript Language Reference Manual. (If the PostScript collation parameter is true, PostScript copies is - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 42
Printer Control Panel Displayed Error Codes" section of this user guide, then perform the appropriate action. If these problems persist, call for Xerox Service. • Refer to the ERROR/WARNING PAGE, if printed, for causes of the problem may still print. • Run a PRINTER CONFIGURATION Test Print from the - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 43
LCD displays on the Printer, and the LEDs on your AccXES Controller. Find the error message in the lists in this section, then perform the appropriate action. If the problem persists, call for Xerox Service. • Refer to the ERROR/WARNING PAGE, if printed, for causes of the problem. Most of the errors - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 44
IP Address, Subnet Mask, and Gateway. Normal Test - Press the Normal button to print the printer's configuration and settings information. Full Test - Press the Full button to print the printer's configuration, settings and pen palettes information PostScript Test - Press the PostScript button to - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 45
be • Press the ENTER key again and will be displayed. • Press and repress the NEXT key to choose a Test Print: ALL, PRINTER CONFIGURATION, PRINTER SETTINGS, PEN PALETTES or POSTSCRIPT (showing the Adobe logo and firmware version information). • Press the ENTER key again to enable your - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 46
port and protocol enables), Network Interface Card Hardware (HW) addresses, status of Job Accounting, and Scanner Configuration. When trouble arises, print out a copy of the PRINTER CONFIGURATION Test Print to review error logs and to see if all options and enables are correctly set. The test - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 47
application print driver or the Document Submit Tool options, and are therefore using these defaults for printing. For Manual. For full details on permanently changing the XES Synergix 8855 printer's operating defaults or the X2-TECH's operating defaults, go to the Web Printer Manager Tool User Guide - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 48
/8855 & X2-TECH System Introduction Using Test Prints (continued) PRINTER PEN SETTINGS Test Print Eight user defined pen palettes, and one factory default (read only) pen palette, are stored within the printer's Controller in support of CGM, CalComp 906/907, VCGL (color feature only), VDS, HP-GL/HP - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 49
Using Test Prints (continued) User-definable pen patterns List of numbered pens (0 to 255)with userdefinable Width, Pattern, Color and Override attributes. Figure 18. Typical Pen Settings Test Print for Pen Palette 1 XES Synergix 8825/8830/8850/8855 & X2-TECH System Introduction 41 - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 50
problem in communicating with the folder. Follow the instructions on the Folder Message Display. This code indicates that the toner cartridge is out of toner and should be replaced. Refer to the CARE section, "Replacing the Toner Cartridge," in the Xerox 8825/8830 Printer Operator Manual. This code - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 51
8825/8830/8850 Printer Control Panel Displayed Error Codes (continued) Status Code Error. Accounting Disk Full Error. Accounting Record Limit Warning. Accounting Disk Full Warning. Accounting Record Limit Explanation Printing operations halted. The amount of memory allocated for Job Accounting on - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 52
loaded in Roll 4 (bottom) drawer Indicates xx size cut sheet is loaded on manual bypass Printer requires powering off, then back on Toner waste container is not installed properly Media jam in printer Printer is low on toner Roll x is out of media, or is loaded incorrectly Top drawer is not closed - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 53
X2-TECH LCD-Displayed Error Codes For the meanings of error messages displayed on the X2-TECH printer's LCD, refer to Appendix A of the ColorgrafX X2 User Guide. XES Synergix 8825/8830/8850/8855 & X2-TECH System Introduction 45 - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 54
indicate the following conditions: Controller Status LEDs LED Number Color LED 1 Green LED 2 Green LED 3 Yellow problem. "Attention." Indicates that a Printer or Finisher fault has occurred. May indicate a paper jam, out of toner condition, out of media condition, or a communications problem - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 55
instructions on display. Also, try switching off system power, checking cables, then switching on system power. This is typically a scanner media jam. Try manually removing document if necessary. Rescan the document if necessary. Power off and power on the system if subsequent scans fail to print - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 56
Codes (continued) Status Code SCANNER FAULT 50000009 INTERNAL FAULT. CALL FOR SERVICE. SCANNER FAULT 5000000A INTERNAL FAULT. CALL FOR SERVICE 50000015 Follow instructions on display. Recommendation Follow instructions on display. printing. If error message continues to display, call for service. - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 57
Scanner Control Panel Displayed Error Codes (continued) Status Code 40000001: Error. Accounting Disk Full 40000002: Error. Accounting Record Limit 40000001: Warning. Accounting Disk Full 40000002: Warning. Accounting Record Limit Recommendation Scanning operations halted. The - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 58
codes from the log. The total number of seconds of power-on time value is not cleared by restoring Factory Defaults. Instructions for restoring factory defaults, are provided in the XES Synergix 8825/8830/8850 Controller Setup Manual for Firmware 8.0, or in the Web Printer Manager Tool User Guide - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 59
What To Do About Printed Error Code Refer to "SCSI Device Error Codes" following this table. Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 60
. What To Do About Printed Error Code Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 61
About Printed Error Code Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call for Service. Call - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 62
operating system. The task controlling the scanner had an unexpected failure when requesting an operation from the scanner. What To Do About Printed Error Code Power down system. Check connections between the scanner SCSI interface and the controller. Power on system. Power down the system. Verify - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 63
Do About Printed Error Code Manually remove the document if necessary. Rescan the document if necessary. If subsequent scans fail to print it is may occur infrequently during heavy system use. Try again. If problem persists, call Customer Service. Power down the system. Check cables. Power on the - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 64
/8850/8855 & X2-TECH System Introduction 56 SCSI Device Error Codes Displayed in the Controller Configuration error log of the PRINTER CONFIGURATION Test Print, SCSI Device Error Codes are in the "1ncckkaa" format. The meaning of the error codes follows Code n cc kk aa Meaning is the SCSI ID of - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 65
SCSI Device Error Codes Chart SCSI Sense Key 01 03 04 05 ?? Description / may be logged infrequently. Frequent occurrence indicates that the disk drive should be replaced. Call for Service. MEDIUM ERROR. Indicates that the command terminated with a non-recovered error condition that was probably - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 66
8830/8850 Printer/Digital Solution XES Synergix 8825/8830/8850 Printer • High quality, mid-volume printing. • printer setup. • Optional folder with programs selectable using the WebPMT. • Optionally available Xerox Ethernet port for TCP/IP communication. Support for EtherTalk, NetBEUI, and Novell is - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 67
panel so that an access code is required to access certain features printer from your workstation. • A Net Port Monitor file is included with Windows 95/98/ NT 4.0/2000 drivers new Color Enablement feature key is available enabling Scanning-to-Net in color in TIFF and JPEG formats. The printing - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 68
Document Submit Tool, the Document Retrieve Tool, and the Printer Queue Tool. These tools are used to do the following: Print Drivers • ADI print drivers for AutoCAD releases 13 and 14. HDI print drivers for AutoCAD 2000 and 2000i. • HP-GL/2/HP RTL print drivers for Windows. • PostScript PPD Drivers - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 69
the purchase of an XES Synergix 8855 Digital Solution (printer, Controller, and scanner). • Effective with Firmware Release 7.5, a new Color Enablement feature key is available enabling Scanning-to-Net in color in TIFF and JPEG formats. The printing of JPEG files is also enabled in Firmware Release - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 70
to print. • Bi-directional capabilities of the Windows RTL/GL2 Print Drivers communicate Color Enablement feature key is available enabling Scanning-to-Net in color in TIFF and JPEG formats. The printing is standard. Web Print Manager Tool • This tool is used to change printer default settings, (such - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 71
the Document Submit Tool, the Document Retrieve Tool, and the Printer Queue Tool. These tools are used from your PC or Print Drivers • ADI print drivers for AutoCAD releases 13 and 14. HDI print drivers for AutoCAD 2000 and 2000i. • HP-GL/2/HP RTL print drivers for Windows. • PostScript PPD Drivers - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 72
the X2TECH Color Printer/Digital Solution X2-TECH Color Printer • Resolution of 360 x 360 or 720 x 720 dpi in both monochrome and full color. • Six print heads Graphic Art paper. • Available roll sizes for each supported media type can be quickly and easily checked from the supplies page of the XES - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 73
Render Mode is set to Grayscale.. • When supported by the optional PostScript license, two types of printer, Controller, and scanner). • Effective with Firmware Release 7.5, a new Color Enablement feature key is available enabling Scanning-to-Net in color in TIFF and JPEG formats. The printing - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 74
is not a valid setting for the X2-TECH color printer. For information on Media Mismatch setting, see the Media Page of the Web PMT User Guide (for firmware 8.0). • Bi-directional capabilities of the Windows RTL/GL2 Print Drivers communicate with the Controller to determine the feature set - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 75
color printer and scanner (if so equipped). • Create sets of documents that can be saved as a single file and sent to a remote printer from your workstation. • Assign and manipulate printing for use in the creation of reports. Print Drivers • HP-GL/2/HP RTL print drivers for Windows 95, 98, NT4, and - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 76
disk drive. The Controller is attached to the side panel of the 8825 Printer as an embedded device. Electrical Requirements 100 - 250 VAC auto-ranging power provided: RJ-45 connection, supporting TCP/IP only. Network Optional External Ethernet Adapter available to support TCP/IP, Novell 3.x, - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 77
panel of XES Synergix 8825/8830 Printer as an embedded device. 100 - the lower serial port is used for service. For later releases, the upper serial port supporting TCP/IP only. Optional External Ethernet Adapter available to support TCP/IP, Novell 3.x, 4.x, 5.x, and NetBEUI. Interface supporting - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 78
EV4 (8825) General Specifications Printer Feature Client/Host Support UNIX telnet, tftp, and lpr/lpd AccXES Client Tools Web Printer Manager Tool AccXES Account Management Tool PC/Windows NT 3.51/4.0 PC/Windows '95/98 Windows 2000 HP-RTL/HP-GL/2 Print Driver ADI Drivers for AutoCAD R13/R14 HDI - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 79
Printer Feature Print Job Input Host Interfaces Network Protocols TCP/IP protocol support Automatic Active Port Sensing Job puts, FTP, ping, ) IP Address Resolution: DHCP, BOOTP, RARP Wide area network support (default gateway, netmask parameters) Yes Internal to controller: 143 MB+ hard disk - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 80
& X2-TECH System Introduction 72 Print Job Processing Data Formats Job Control Language Color Support Automatic Format Recognition Palettes and Patterns halftoning technique supporting 128 gray levels (8825/8830) 256 for 8850. Two user-selectable rendering options are available: Area Optimized - - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 81
Solution User Guide for more details on particular resolution and scan speed combinations. User-selectable priority for inserting copy jobs in internal print queue; interrupt current print job to copy or insert copy job after current print job. If print job not interrupted, supports concurrent - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 82
off, light, dark, auto-suppression or Auto IQ), Contrast (7 levels). Preview Image Generation: Enable/Disable Binarization: Error diffusion or simple thresholding Supports saving and restoring up to 10 sets of scan parameters. Same templates as copy templates. Delete all images or last image by user - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 83
Finisher Support Print Engine Interface Copier/printer/scanner: 200 "typical" E size pages @ 64 MB w/ 4.5G HDD. (Note: that a system with a 1GB HDD running PostScript may achieve less than 100 E size page sets. This is a marginal configuration.) Generic Finisher Interface Folder. 8830 - Xerox P193R - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 84
Printer/Digital Solution Features and Specifications Printer Printer Only: 64 MB Base (128 MB recommended with PostScript option and PDF printing) Copier/Printer: 64 MB Base (128 MB recommended with PostScript option and PDF printing serial port provided. 9 pin service serial port provided. (DTE) - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 85
Feature Client/Host Support UNIX (Solaris) Windows NT 4.0 Windows 95/98 Windows 2000 Description/Specifications tftp and lpr/lpd ftp and telnet (command line) Web Printer Manager Tool AccXES Client Tools AccXES Account Management Tool HP RTL/HP-GL/2 Print Driver ADI Drivers for AutoCAD R13/R14 - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 86
Printer Feature Print Job Input Host Interfaces Network Protocols Automatic Active Port Sensing Job Spooling/Queuing Job Queue Management Print Job Processing Data Formats Job Control Language Color Support print mode. Copier input from Synergix Scan System through IEEE 1394 interface. Copy/print - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 87
Printer parameters when scanning new image. Supports saving and restoring up to 10 sets of copy parameters. Supports scanning and collating a set of on the scanner. Snapshot center of document using current copy image settings and print on smallest media possible (x wide by 210 mm long where x is the - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 88
3410, Lossless. 6 to 16 meters (19.7 to 52.5 feet) depending upon your installation configuration Print: 1 to 999. Copy: 1 to 999. 200 E size pages with 64 MB RAM and a 9.1 GB hard drive Optional Folder. Xerox Stacker. TCP/IP FTP get Single bit TIFF 6 Group IV compressed image, 8-bit grayscale TIFF - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 89
Panel Interface Accounting Remote Configuration Localization (Languages supported) Description/Specifications All printer parameter and processing defaults sets are available through Web PMT No printer UI provided. See Web PMT and test print error messages. Status LED's (4 light display) Status - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 90
82 Appendix 5 - X2-TECH Printer/Digital Solution Features and Specifications Printer Feature Controller (KLF) CPU Canada ICES-003 Class A; VCCI Class A 9 pin Host serial port provided. 9 pin service serial port provided. (DTE) (IEEE 1284 Compliant) High density port connector provided. 50 pin - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 91
Client/Host Support UNIX (Solaris) Windows NT 4.0 Windows 95/98 Windows 2000 Description/Specifications tftp and lpr/lpd ftp and telnet (command line) Web Printer Manager Tool AccXES Client Tools AccXES Account Management Tool is Optional Accessory HP RTL/HP-GL/2 Print Driver ADI Drivers for - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 92
/8855 & X2-TECH System Introduction 84 Printer Feature Print Job Input Host Interfaces Network Protocols Automatic Active Port Sensing Job Spooling/Queuing Job Queue Management Print Job Processing Data Formats Job Control Language Color Support Automatic Format Recognition Palettes and Patterns - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 93
24.4 meters (80 feet) Print: 1 to 999. Copy: 1 to 999. Yes. Supported by the Controller. Not supported with the X2-TECH printer. TCP/IP FTP get Single Rendering adjustments available from the Rendering Page of the Web PMT. Color adjustments (gamma and CMYK ink limits) available from the Media Page - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 94
Panel Interface Accounting Remote Configuration Localization (Languages supported) Description/Specifications All printer parameter and processing defaults sets are available through Web PMT No printer UI provided. See Web PMT and test print error messages. Status LED's (4 light display) Status - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 95
Logistics Support Computer Graphics Metafile Data Format Interpreter Dynamic Host Configuration Protocol Direct Memory Access dots per inch Distributed Printing Services Discrepancy Format Universal Exit Language User Interface or Control Panel Web Printer Manager Tool Xerox Engineering Systems 87 - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 96
This page has been intentionally left blank. - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 97
This page has been intentionally left blank. - Xerox 850DX | Xerox Wide Format 8825/8830/8850/8855/X2 Tech System Introduction - Page 98
Prepared by: Xerox Corporation Global Knowledge & Language Services 800 Phillips Road Building 845-17S Webster, New York 14580-9791 USA © XESystems Inc. 2001. All rights reserved. Printed in the United States of America XEROX®, X2-TECH with RACER™, XES Synergix 8855 and 8855 Digital Solution, XES
XES Synergix™
8825/8830/8850/8855 & X2-Tech
System Introduction
701P37895
March 2002