Xerox M118i PostScript® User Guide - Page 42
Use Nearest Size No Zoom, Custom Paper Auto Orientation
UPC - 095205219265
View all Xerox M118i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
5 Operation on Macintosh Computers Output Destination - Specifies the output destination. NOTE: The items that can be selected vary according to whether the optional side tray kit or finisher has been installed. Offset Stacking - The position of individual jobs or sets of copies are shifted to either side of the output tray to enable easy separation. Collated - Selects whether to collate a multiple-page file per set when they are printed. This function is enabled when the printer HDD kit is installed. Feed Separators from - Specifies the paper tray that transparency dividers are to be fed from. When [Auto] is selected, the tray set on the machine is used as the feed destination. Print on Separators - Specifies whether or not to print on the transparency dividers as well as the transparency. Paper Type (Separators) - Specifies a paper type for the transparency divider. Bypass Feed Orientation - Specifies the paper orientation when printing from the bypass tray. When feeding the short edge of the paper first, select [Landscape]. When feeding the long edge of the paper, select [Portrait]. Paper Type/Media - Specifies a paper type for the transparency divider. Halftone - Select the halftone settings for printing. Select [Fine Dots] for the small size halftone dot commonly used in PostScript. Select [Thick Dots] for coarser dots than the Fine Dots setting. Select [Type 3] for the same halftone setting that is used in PCL. Image Enhancement - Specifies whether or not to use the Image Enhancement function. Selecting [On] smooths out boundaries when printing. This reduces jagged edges by artificially increasing the resolution of the image. When printing a bitmapped image composed of coarse halftone dots, smooth color gradation is impossible in certain situations. In this case, select [Off]. Draft Mode - Specifies whether or not to reduce the amount of toner used when printing drafts. When [On] is selected, the overall printed color becomes lighter. This is best for printing documents when high print quality is not necessary. Custom Paper Auto Orientation - Specifies whether or not to correct the orientation of the custom paper. Substitute Tray - Specifies what action to take when the paper for the print size is not loaded in the machine. Use Printer Settings - Use the printer settings. The settings can be confirmed on the control panel. Display Message - Display paper supply messages on the control panel. Printing is impossible until paper is supplied. Use Nearest Size (Adjust to Fit) - Selects the nearest paper size and automatically adjusts the image size as necessary. Use Nearest Size (No Zoom) - Selects the nearest paper size and prints the same size as the image. 42 Xerox WorkCentre 118 Postscript® User Guide