Yamaha 01V96i Reference Manual - Page 141
MULTI FILTER, FREEZE, Two input, two output 3-band multi-filter, dB/octave., One input
View all Yamaha 01V96i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Appendix: Parameter Lists Effects Parameters 141 MULTI FILTER Two input, two output 3-band multi-filter (24 dB/octave). Parameter Range TYPE 1 HPF, LPF, BPF TYPE 2 HPF, LPF, BPF TYPE 3 FREQ. 1 FREQ. 2 FREQ. 3 LEVEL 1 LEVEL 2 LEVEL 3 RESO. 1 RESO. 2 RESO. 3 HPF, LPF, BPF 28.0 Hz-16.0 kHz 28.0 Hz-16.0 kHz 28.0 Hz-16.0 kHz 0-100 0-100 0-100 0-20 0-20 0-20 Description Filter 1 type: high pass, low pass, band pass Filter 2 type: high pass, low pass, band pass Filter 3 type: high pass, low pass, band pass Filter 1 frequency Filter 2 frequency Filter 3 frequency Filter 1 level Filter 2 level Filter 3 level Filter 1 resonance Filter 2 resonance Filter 3 resonance FREEZE One input, one output basic sampler (Available for internal effects 1 and 2.). Parameter Range REC MODE MANUAL, INPUT REC DLY -1000 to +1000 ms TRG LVL -60 to 0 dB TRG MASK 0-1000 ms PLY MODE MOMENT, CONTI., INPUT START 1 END LOOP LOOP NUM START [SAMPLE] END [SAMPLE] LOOP [SAMPLE] PITCH FINE 1 1 0-100 2 2 2 -12 to +12 semitones -50 to +50 cents MIDI TRG OFF, C1-C6, ALL Description In MANUAL mode, recording is started by pressing the REC and PLAY buttons. In INPUT mode, Record-Ready mode is engaged by pressing the REC button, and actual recording is triggered by the input signal Recording delay. For plus values, recording starts after the trigger is received. For minus values, recording starts before the trigger is received Input trigger level (i.e., the signal level required to trigger recording or playback) Once playback has been triggered, subsequent triggers are ignored for the duration of the TRG MASK time In MOMENT mode, the sample plays only while the that the PLAY button is pressed. In CONT mode, playback continues once the PLAY button has been pressed. The number of times the sample plays is set using the LOOP NUM parameter. In INPUT mode, playback is triggered by the input signal Playback start point in milliseconds Playback end point in milliseconds Loop start point in milliseconds Number of times the sample plays Playback start point in samples Playback end point in samples Loop start point in samples Playback pitch shift Playback pitch shift fine PLAY button can be triggered by using MIDI Note on/off messages 1. 0.0~2970.5 ms (fs=44.1 kHz), 0.0~2729.2 ms (fs=48 kHz), 0.0~2970.5 ms (fs=88.2 kHz), 0.0~2729.2 ms (fs=96 kHz) 2. 0~131000 (fs=44.1 kHz, 48 kHz), 0~262000 (fs=88.2 kHz, 96 kHz) 01V96i-Reference Manual