Yamaha 01V96i Reference Manual - Page 30

30 Bus Outs Setting the Stereo Out and Bus Out 1-8 from the Display To set the Stereo Out and Bus Out 1-8 parameters, you can either move the cursor to the desired parameter on the display and change the value, or operate the desired button or control on the top panel. This section explains how to set the parameters on the display. Tip: Refer to "Input & Output Patching" on page 43 for more information on how to set inserts. Delaying the Stereo Out and Bus Outs To delay the Stereo Out and Bus Out 1-8 signals, press the [ /INSERT/DELAY] button repeatedly until the /INS/DLY | Out Dly page appears. Attenuating the Stereo Out and Bus Out To attenuate the Stereo Out and Bus Out signals, press the DISPLAY ACCESS [EQ] button, then press the [F4] button to display the EQ | Out Att page. On this page, you can attenuate the Bus Out 1-8, Aux Out 1-8, and Stereo Out signals. The parameters on this page (and the procedure for setting them) are the same as for Input Channels, except that this page does not include the MIX/FB.GAIN parameters (see page 18). Tip: You can also display the Out Dly page by pressing the [ /INSERT/DELAY] button once, then press the [SEL] button to select the Stereo Out or Bus Out 1-8. The parameters on this page (and the procedure for setting them) are the same as for Input Channels (see page 20). Compressing the Stereo Out and Bus Outs To set the Stereo Out and Bus Out 1-8 compressors, press the [DYNAMICS] button, then the [F3] button to display the Dynamics | Comp Edit page, and use the [SEL] buttons to select the Stereo Out or Bus Out 1-8. 01V96i-Reference Manual The parameters on this page (and the procedure for setting them) are the same as for Input Channels (see page 20).