Yamaha 01V96i Reference Manual - Page 74
Libraries, About the Libraries, General Library Operation - studio manager
View all Yamaha 01V96i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
74 Libraries Libraries This chapter describes the 01V96i's various libraries. About the Libraries The 01V96i features seven libraries that enable you to store Channel, Input Patch, Output Patch, Effects, and other data. You can also quickly recall this data from the libraries to restore previous parameter values. The 01V96i offers the following libraries: • Channel Library • Input Patch Library • Output Patch Library • Effects Library • Gate Library • Compressor Library • EQ Library Tip: • You can store library data to a computer hard disk using the included Studio Manager software. Be sure to back up your important data. • You can also store library data to an external MIDI device, such as a MIDI data filer, by using MIDI Bulk Dump (see page 107). General Library Operation Most library functions are the same for each library. 1. Use the buttons on the top panel to locate the desired library pages. The procedure for locating library pages varies depending on the library. Refer to the latter part of this chapter for more information on how to display the desired library page. The example below assumes you have located the Input Patch library page. 1 2 3 4 An " " icon is displayed next to the name of read-only preset memories. You cannot store, clear, or edit the titles of these memories. Memories #0 and #U are special read-only memories. Recall memory #0 to reset the parameter settings to their initial values. Recall #U to undo memory recall and store operations. 2. Rotate the Parameter wheel or press the [INC]/[DEC] buttons to select the desired memory. The selected memory appears inside the dotted box. 3. Move the cursor to one of the following func- tion buttons, then press [ENTER]. 1 TITLE EDIT This button displays the Title Edit window, which enables you to edit the title of the selected memory. Move the cursor to the OK button, then press [ENTER] to confirm the edited title. Refer to "Title Edit Window" in the Owner's Manual (booklet) for more information on entering characters. 2 RECALL This button recalls the contents of the selected library memory. If you turn on the Recall Confirmation parameter on the DIO/Setup | Prefer1 page, the 01V96i displays a memory recall confirmation window. 3 STORE This button stores the settings to the selected memory. Before you store the settings, you can enter or edit the title using the Title Edit window. You can disable the Title Edit window by turning off the Store Confirmation parameter on the DIO/Setup | Prefer1 page. If you bypass the Edit Title window, the name "New Data" will be used as a title for the Scene memory. 4 CLEAR This button deletes the contents of the selected memory. After you press [ENTER], the 01V96i displays a confirmation window. To execute the delete operation, move the cursor to the YES button in the confirmation window, then press [ENTER]. Note: If you select a memory that already contains settings and execute the delete operation, the settings will be lost. Make sure that you do not accidentally delete important settings. The library memory title list is displayed in the middle of the page. The message "No Data!" appears in the title column of empty library memories. 01V96i-Reference Manual