Yamaha 107 Reference Booklet - Page 63
Attach the pedal box assembly., assembly has been loosely attached, go back and tighten
View all Yamaha 107 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
6 • Six screws on each side NAttach the pedal box assembly. CAUTION • When you lift the pedal box assembly, make sure that you lift by both legs. Before attaching the rear leg and pedal box assembly, insert the pedal cord plug extending from the left leg into the corresponding socket in the main unit. Make sure that the protruding clip on the connector is on the right. Put the excess cord into the leg and loosely secure the rear leg and pedal assembly using six 5 x 12 millimeter large screws for each leg (four screws per leg and two screws on each leg bracket). Once the rear leg and pedal assembly has been loosely attached, go back and tighten all 12 of the screws on the rear leg and pedal assembly, and also secure the 8 screws on the speaker box. CVP-109/107/105/103/700 63