Yamaha 24N DME64N/24N V1.2 Supplemental notes - Page 7

Message Recovering Saving Failed Saving HA Info Saving Setup Info Scene Recalling Scene Storing SLOT1 Sync Err SLOT2 Sync Err SLOT3 Sync Err SLOT4 Sync Err Slots Overloaded Store Disable WCLK Unlocked Zone Sync Err Content Corrective Action The DME64N/24N program update has failed. Restoring the previous program. Do NOT turn off the power while this display is on the screen. Retry the program update. If the update is still unsuccessful after several retries, a malfunction is likely. Contact a Yamaha electric sound service outlet listed at the end of this manual (page 79). Cannot save settings. Since this is likely to be a device failure, contact a Yamaha electric sound service outlet listed at the end of this manual (page 79). Saving head amp information. Do NOT turn off the power - while this display is on the screen. Saving information (except head amp information) that is - set in the utility screen. Do NOT turn off the power while this display is on the screen. Recalling a scene. - Storing a scene. Do NOT turn off the power while this - display is on the screen. The word clock input from Slot1 is not synchronized with Recheck the settings for using the word clock that the DME64N/24N word clock. synchronizes the DME64N/24N and external devices. The word clock input from Slot2 is not synchronized with Recheck the settings for using the word clock that the DME64N word clock. synchronizes the DME64N and external devices. The word clock input from Slot3 is not synchronized with the DME64N word clock. The word clock input from Slot4 is not synchronized with the DME64N word clock. The electric current being consumed by cards currently This combination cannot be used. Check the combination installed in the slots exceeds the specified value. of cards that are currently installed. Scene storing is currently prohibited in the settings. This prohibition may have been set by the administrator to prevent unexpected data changes caused by erroneous user operations. Change the setting by going to the Misc page of the utility screen and changing the setting for Scene Store to "Enable." A valid word clock is not being input or cannot be detected. Recheck connections and internal settings related to the word clock. Data from the wrong zone has been input or data has not Use DME Designer to resend the data. been input. NOTE For information about updated CD-ROM versions to be released in the future, contact the store where you purchased the device, or contact Yamaha customer service using the contact information at the end or your "DME64N/24N Owner's Manual." Notes for DME64N/DME24N Version 1.2 7