Yamaha CLP-156 Owner's Manual - Page 11

Reverb The [REVERB] button selects a number of digital reverb effects that you can use for extra depth and expressive power. To select a reverb type press the [REVERB] button a few times until the indicator corresponding to the desired type lights (the indicators light in sequence each time the [REVERB] button is pressed). No reverb is produced when all indicators are off. OFF When no reverb effect is selected (no REVERB indicator is lit), a special natural damper effect is applied to the piano voices. This simulates the natural resonance of an acoustic piano's strings and sound board when the damper pedal is pressed. ROOM ........ This setting add a continuous reverb effect to the sound that is similar to the type of acoustic reverberation you would hear in a medium-size room. HALL 1 ...... For a "bigger" reverb sound, use the HALL 1 setting. This effect simulates the natural reverberation of a medium-size concert hall. HALL 2 ...... For a really spacious reverb sound, use the HALL 2 setting. This effect simulates the natural reverberation of a large concert hall. COSMIC .... The COSMIC reverb effect produces an echo-plus-reverb sound that can add life and animation to your music. q Adjusting Reverb Depth REVERB ROOM HALL 1 HALL 2 COSMIC C2 C3 C4 0 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Decrease depth. Normal depth. Increase depth. 8 TEMPO w v q Memorizing the Reverb Type & Depth Settings REVERB C7 ROOM HALL 1 HALL 2 COSMIC The depth of the selected reverb effect can be adjusted for the current voice (separate settings can be made for each voice and reverb type) by using the C2 through C4 keys on the keyboard or the TEMPO [s] and [t] buttons while holding the [REVERB] button. The selected reverb depth value (0 ... 15) will be shown on the TEMPO display until the [REVERB] button is released. The default reverb depth settings are given in the "Default Settings" chart below. When using the keyboard, the C3 keys sets the "normal" depth (a setting of "8"). Keys to the left of C3 decrease the reverb depth, and keys to the right of C3 increase the reverb depth. When using the TEMPO buttons the first time either button is pressed the current depth setting appears on the TEMPO display, then pressing the [s] button increases the reverb depth while the [t] button decreases the reverb depth. Press both the [s] and [t] buttons simultaneously to instantly recall the normal ("8") setting. s A setting of "0" sets the minimum reverb depth (no reverb). s A setting of "8" sets medium "normal" reverb depth. s A setting of "15" sets the maximum reverb depth. NOTE • Hold either the TEMPO [s] or [t] button for continuous scrolling in the specified direction. • A setting of "1" cannot be entered via the keyboard. Default Settings STRINGS, ORGAN ROOM 8 (C3) HALL 1 8 (C3) HALL 2 11 (F3) COSMIC 10 (E3) * All effect types set to 8 (C3) for all other voices. * The default reverb type is ROOM. Press the C7 key while holding the [REVERB] button to memorize the current effect type and all depth settings made since the power was turned on. The memorized settings will be retained in memory for about one week after the power is turned off, then the default settings will be restored. To keep the memorized settings for longer periods, turn the power on briefly at least once a week. If these settings are not memorized as described above, they are retained in memory only until the Clavinova is turned off. 11