Yamaha CLP-156 Owner's Manual - Page 25

C Confirm & Operation Start the Format F80 F 0 Use the TEMPO [v] (YES) and [w] (NO) buttons to confirm and continue or cancel the operation. "YES" if you intend to execute the format operation or "NO" if you wish to cancel the operation. This step is necessary because formatting completely erases any data that is already on the disk - make sure that the disk you're about to format does not contain any important data! Formatting will begin the instant you select "YES". The number of each "track" on the disk will be shown on the display as the format process continues ("F80" through "F 0"). When formatting is complete "End" will appear briefly then the display will revert to the normal song number display. Utility 5: Song Copy Recorder song data - including any existing individual key tuning data - can be "backed up" by copying to a new song number or a different disk, as follows: Z Insert a Source Disk & Song Select the Insert the disk containing the song you want to copy, and use the SONG [r] and [f] buttons to select the number of the song you wish to copy. X Select the Function Song Copy cpY c__ MIDI/ TRANSPOSE SONG r f Hold the [MIDI/TRANSPOSE] button and press the SONG [r] or [f] button as many times as necessary until "cPy" appears on the display - then release the [MIDI/TRANSPOSE] button when "c_ _" appears flashing on the display ("c_ _" will not appear if the selected song number contains no data). C Select Song the Destination c 1 ~ c60 Copy to same disk % 1 ~ %60 Copy to different disk TEMPO w v V Start Copying cPY PLAY REC Use the TEMPO [v] and [w] buttons to select the song number you wish to copy to (i.e. the destination song number - "c 1" through "c60"). If you select a song number that already contains data, that data will be overwritten by the new song data. If you select a song number greater than "c60" a bar will appear above the "c" in the song number, indicating that the copy will be made to a different disk. NOTE • You can cancel the copy function before actually starting the copy operation (next step) by pressing either the SONG [r] or [f] button. Press the [PLAY] button to begin the actual copy operation. "cPy" will appear on the display during the copy operation, then the destination song number will appear when the copy operation has finished. NOTE • "n y" will flash on the display when you attempt to start copying if you have selected a destination song number that already contains data. Press the TEMPO [s] (YES) button if it is OK to go ahead with the copy operation and erase the existing data in the destination song. Press TEMPO [t] to cancel the copy operation. 25