Yamaha CLP-156 Owner's Manual - Page 24

Utility Functions C Select the Load Individual Key Tuning Function tun Lod MIDI/ TRANSPOSE SONG r f Hold the [MIDI/TRANSPOSE] button and press the SONG [r] or [f] button as many times as necessary until "tun" and "Lod" flash alternately on the display - don't release the [MIDI/TRANSPOSE] button yet. V Execute the Load Individual Key Tuning Function Lod End MIDI/ TRANSPOSE PLAY REC While still holding the [MIDI/TRANSPOSE] button, press the [PLAY] button to actually begin loading the data. Simply release the [MIDI/ TRANSPOSE] button before pressing the [PLAY] button if you want to cancel the function. "Lod" will appear on the display while the data is being loaded, then "End" will appear briefly when the load operation has been completed. NOTE • The Individual Key Tuning mode will automatically be turned ON when the data has been loaded. • If no individual key tuning data exists in the selected song number, "no" will appear on the display. If this occurs, try again from step 2, above. Utility 4: Floppy Disk Format The Clavinova uses only 3.5" 2DD floppy disks. We recommend that you use Yamaha 2DD disks. Before you can use a new disk for recording, the disk must be "formatted" so that the Clavinova can recognize it and correctly write the music data onto it. Z Insert the Disk Formatted To Be Insert a new blank disk. Make sure that the disk's write protect tab is set to the "write" position (tab closed), and insert the new disk into the disk drive unit with the sliding door facing the drive slot and the label side of the disk facing upward. The disk should click securely into place, and the disk drive lamp should light briefly. For X Engage the Format Function NOTE • "For" will flash on the display to indicate that a blank (unformatted) disk or one with a format not recognizable by the CLP-156 is loaded in the drive. In this case you can go directly to the next step. If an alreadyformatted disk that you want to re-format is loaded (i.e. to completely erase all data from the disk in one operation), you'll have to select the format function by pressing the SONG [r] or [f] button as many times as necessary until "For" appears on the display while holding the [MIDI TRANSPOSE] button, then release the [MIDI/TRANSPOSE] button when "n y" appears flashing on the display and proceed to step 3. • "Pro" will appear on the display if a protected disk that cannot be formatted is loaded in the drive: a write-protected disk or a Disklavier PianoSoft disk. Press the TEMPO [v] or [w] button. "n y" will flash on the display. nY TEMPO w v 24