Yamaha CP33 Owner's Manual - Page 39

Reference F6. Click Volume Use this function to adjust the Click volume. • Setting range: 1 - 20 • Default setting: 10 SHORTCUT You can jump directly to the Click functions by pressing the [TEMPO/FUNCTION] button while holding the [CLICK] button. F7. MIDI Functions This allows you to make detailed adjustments to the MIDI settings. For more information about MIDI, see the "About MIDI" section (page 42). MIDI Transmit Channel Selection In any MIDI control setup, the MIDI channels of the transmitting and receiving devices must be matched for proper data transfer. This parameter enables you to specify the channel on which the CP33 transmits MIDI data. • Setting range: 1 - 16, OFF (not transmitted) • Default setting: 1 n In Dual, Voice 1 data is transmitted on its specified channel. In Split, right Voice data is transmitted on its specified channel. In Dual, Voice 2 data is transmitted on the next greater channel number relative to the specified channel. In Split, left Voice data is transmitted on the next greater channel number relative to the specified channel. In either case, no data is transmitted if the transmit channel is set to "OFF." n While the Master mode is turned on, "*03 MIDI Transmit Channel" parameter in the Master Edit menu will be enabled for MIDI channel assignments. Detailed Settings MIDI Receive Channel Selection In any MIDI control setup, the MIDI channels of the transmitting and receiving devices must be matched for proper data transfer. This parameter enables you to specify the channel on which the CP33 receives MIDI data. • Setting range: ALL, 1&2, 1 - 16 • Default setting: ALL ALL: "Multi-timbre" Receive. This allows simultaneous reception of different parts on all 16 MIDI channels, enabling the CP33 to play multi-channel Song data received from a music computer or sequencer. 1&2: "1&2" Receive. This allows simultaneous reception on channels 1 and 2 only, enabling the CP33 to play 1 and 2 channel Song data received from a music computer or sequencer. Local Control ON/OFF "Local Control" refers to the fact that, normally, the CP33 keyboard controls its internal tone generator, allowing the internal Voices to be played directly from the keyboard. This situation is "Local Control On," since the internal tone generator is controlled locally by its own keyboard. Local Control can be turned OFF, however, so that the CP33 keyboard does not play the internal Voices, but the appropriate MIDI information is still transmitted via the MIDI OUT terminal when notes are played on the keyboard. At the same time, the internal tone generator responds to MIDI information received via the MIDI IN terminal. • Setting range: ON/OFF • Default setting: ON CP33 Owner's Manual 39