Yamaha CP33 Owner's Manual - Page 40
Program Change ON/OFF, Initial Setup Send
UPC - 086792840802
View all Yamaha CP33 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Reference Detailed Settings Program Change ON/OFF Normally the CP33 will respond to MIDI program change numbers received from an external keyboard or other MIDI device, causing the correspondingly numbered Voice to be selected on the corresponding channel (the keyboard Voice does not change). The CP33 will normally also send a MIDI program change number whenever one of its Voices is selected, causing the correspondingly numbered Voice or program to be selected on the external MIDI device if the device is set up to receive and respond to MIDI program change numbers. This function makes it possible to cancel program change number reception and transmission so that, for example, voices can be selected on the CP33 without affecting the external MIDI device. n For information on program change numbers for each of the CP33's Voices, refer to MIDI Data Format page 51. • Setting range: ON/OFF • Default setting: ON Control Change ON/OFF Normally the CP33 will respond to MIDI control change data received from an external MIDI device or keyboard, causing the Voice on the corresponding channel to be affected by pedal and other "control" settings received from the controlling device (the keyboard Voice is not affected). The CP33 also transmits MIDI control change information when the pedal or other appropriate controls are operated. This function makes it possible to cancel control change data reception and transmission so that, for example, the CP33's pedal and other controls can be operated without affecting an external MIDI device. n For information on control changes that can be used with the CP33, refer to MIDI Data Format on page 51. • Setting range: ON/OFF • Default setting: ON Initial Setup Send This function lets you send the data of the panel settings to a computer. By transmitting the panel settings and recording them on the MIDI sequence recorder prior to the actual performance data, the instrument will be automatically restored to the same settings when the performance is played back. You can also use this function to change the settings of a connected tone generator to the same settings as the instrument. 1. Set up the panel controls as desired. 2. Connect the CP33 to a sequencer via MIDI, and set up the sequencer so it can receive the setup data. 3. Call up the Function menu and select . 4. Press the [YES/+] button to transmit the panel/status data. will appear on the display when the data has been successfully transmitted. The following data can be sent. • Voice selection • [REVERB] type • [REVERB] depth • [EFFECT] type • [EFFECT] depth • Split point • Tuning (F1) • Dual detune (F3.1) 40 CP33 Owner's Manual