Yamaha CVP-309PM Owner's Manual - Page 187

Using the Footswitch or Foot Controller ([AUX PEDAL] jack) Assignable Pedal Functions VOLUME* SUSTAIN SOSTENUTO SOFT GLIDE PORTAMENTO PITCH BEND* MODULATION* DSP VARIATION VIBE ROTOR ON/OFF HARMONY/ECHO VOCAL HARMONY TALK SCORE PAGE+ SCORE PAGE- SONG PLAY/PAUSE STYLE START/STOP TAP TEMPO SYNCHRO START SYNCHRO STOP INTRO1-3 MAIN A-D FILL DOWN FILL SELF FILL BREAK FILL UP ENDING1-3 FADE IN/OUT FINGERED/FING ON BASS BASS HOLD Allows you to use a foot controller to control the volume. This function is available only for the pedal connected to the instrument's AUX PEDAL jack. Allows you to use a pedal to control the sustain. When you press and hold the pedal, all notes played on the keyboard have a longer sustain. Releasing the pedal immediately stops (damps) any sustained notes. Allows if you play a note or chord on the keyboard and press the pedal while holding the note(s), the notes will sustain as long as the pedal is held. However, all subsequent notes will not sustain. This makes it possible to sustain a chord, for example, while other notes are played staccato. Allows you to use a pedal to control the Soft effect. Pressing this pedal reduces the volume and changes the timbre of the notes you play. This is effective only for certain appropriate Voices. When the pedal is pressed, the pitch changes, and then returns to normal pitch when the pedal is released. The portamento effect (a smooth slide between notes) can be produced while the pedal is pressed. Portamento is produced when notes are played legato style (i.e., a note is played while the preceding note is still held). Portamento Time can also be adjusted from the Mixing Console (page 84). This function does not affect certain Natural Voices, which would not sound appropriately with this function. Allows you to bend the pitch of notes up or down by using the pedal. Applies a vibrato effect to notes played on the keyboard. The depth of the effect increases while pedal is pressed. Switches Voice Effect DSP VARIATION on and off. Switches the VIBRATE SW parameter on and off when the VIBE VIBRATE effect type is selected. Switches the HARMONY/ECHO Voice Effect on and off. Switches the Vocal Harmony function on and off. Switches the MIC SETTING Talk function on and off. While the song is stopped, you can turn to the next score page. While the song is stopped, you can turn to the previous score page. Same as the SONG [PLAY/PAUSE] button. Same as the STYLE CONTROL [START/STOP] button. Same as the [TAP] button. Same as the [SYNC START] button. Same as the [SYNC STOP] button. Same as the [INTRO I-III] buttons. Same as the [MAIN VARIATION A-D] buttons. Plays a fill-in, which is automatically followed by the Main section of the button on the immediate left. Plays a fill-in. Plays a break. Plays a fill-in, which is automatically followed by the Main section of the button on the immediate right. Same as the [ENDING/rit. I-III] buttons. Same as the [FADE IN/OUT] button. The pedal alternately switches between the Fingered and On Bass modes (page 101). While the pedal is pressed, the Accompaniment Style bass note will be held even if the chord is changed during Style playback. If the fingering is set to "AI FULL KEYBOARD," the function does not work. Using Your Instrument with Other Devices CVP-309/307 Owner's Manual 187