Yamaha CVP-89 Owner's Manual - Page 50
Load Custom Rhythm, Song Copy
View all Yamaha CVP-89 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
46 Utility Functions s 10: Load Custom Rhythm This function reloads the custom rhythm data saved to disk by the Save Custom Rhythm function, described above. ZInsert a Disk & Select the Load Custom Rhythm Function 10 DISK −> C.RHYTHM SONG 01 PRESS [START] Insert the disk containing the custom rhythm data you want to load into the Clavinova disk drive, then select the Load Custom Rhythm function - see "Selecting & Using the Utility Functions", page 42. XSelect a Song Number and Execute the Function s 11: Song Copy Use the TEMPO [s] and [t] buttons to select the song number from which you want to load the custom rhythm data, then press the [START/STOP] button to actually begin loading the data. "NO DATA!" will appear on the display if you select a song that contains no data. Simply release the [UTILITY] button before pressing the [START/STOP] button if you want to cancel the function. The Load Custom Rhythm function will automatically be exited when the data has been loaded. Performance Memory song data - including any existing registration, individual key tuning, and custom rhythm data - can be "backed up" by copying to a new song number or a different disk, as follows: NOTES • The Song Copy function cannot be executed if the selected song contains only registration, individual key tuning, and/or custom rhythm data. ZInsert a Disk & Select the Source Song Insert the disk containing the song you want to copy, and use the SONG/ PHRASE NUMBER [s] and [t] buttons to select the number of the song you wish to copy. XSelect the Song Copy Function ...Select the Song Copy function - see "Selecting & Using the Utility Functions", page 42. "NO DATA!" will appear on the display if you select a song that contains no data. NOTES • The utility mode can be exited by releasing the [UTILITY] button. CSelect the Destination Song ... 11 SONG COPY SONG 01−>02 PRESS [START] Copy to same disk 11 COPY −> DISK2 SONG 01−>01 PRESS [START] While holding the [UTILITY] button use the TEMPO [s] and [t] buttons to select the song number you wish to copy to (i.e. the destination song number), then release the [UTILITY] button. If you select a song number that already contains data, that data will be overwritten by the new song data. If you select a song number greater than 60 ("DISK 2" will appear on the display), the copy will be made to a different disk. Copy to different disk VStart Copying ... 11 COPY −> DISK2 0/ 3 INSERT DISK2 Insert destination disk. 11 COPY −> DISK2 1/ 3 INSERT DISK1 Insert source disk. Press the [START/STOP] button to begin the actual copy operation. If you chose to copy to a different disk, you may have to exchange the source and destination disks a few times if the song being copied is long and complex. In this case, the Clavinova will prompt you to insert the source and destination disks with the displays shown to the left. "END" will appear on the display briefly when the copy operation has been successfully completed. • While the data is being copied the number of times the disks will have to be exchanged to complete the copy operation will be shown on the display. NOTES • If you copy to a song number that already contains data, "ARE YOU SURE?" will appear on the display. Use the TEMPO [s] (YES) and [t] (NO) buttons to select either (YES) or (NO). (YES) if you intend to execute the copy operation or (NO) if you wish to cancel the operation. The copy operation will begin automatically if you select (YES).