Yamaha CVP-89 Owner's Manual - Page 55

Utility Functions 51 XSelect the Volume Control Function ... 17 VOLUME CONTROL OFF Select the Volume Control function - see "Selecting & Using the Utility Functions", page 42. Use the TEMPO [s] and [t] buttons to turn Volume Control ON or OFF. Once you've turned ON to engage the function you can release the [UTILITY] button. CSelect a Track ... 1:127 123456789ABCDEFG Use the [TAP] and [METRONOME] buttons to select the track for which you want to change the volume level. VSet the Volume... 2: 78 123456789ABCDEFG Use the TEMPO [s] and [t] buttons to set the volume of the selected track. The volume range is from "0" (no sound) to "127" (maximum volume). To re-record the initial volume value press the [REC] button then, in response to the "ARE YOU SURE?" prompt, use the TEMPO [s] and [t] buttons to select ARE YOU SURE? "YES" or "NO" as required. NOTES • The initially recorded volume value is always "127". • Only data originally recorded on the CVP-89 can be re-recorded. Data converted by the Convert to SMF function (page 53) cannot be re-recorded. BExit ...To exit from this function first press the [UTILITY] button to return to the VOLUME CONTROL ON/OFF display, press the TEMPO [s] or [t] button while holding the [UTILITY] button to turn volume control off. NOTES • If the [SONG/PHRASE NUMBER] button is used to select a different song number while the Volume Control mode is engaged, the Volume Control mode will be auto- matically turned OFF and the utility mode will be exited. s 18: Song Name Use this function to enter original titles (up to 12 characters) for your Performance Memory songs. ZInsert a Disk ...Insert the disk containing the song for which you want to enter a title. XSelect the Song Name Function... 18 SONG NAME NO/YES Select the Song Name function - see "Selecting & Using the Utility Functions", page 42. "NO/YES" will flash on the display. Press the TEMPO [s] button (YES) to engage the Song Name function or the [t] button (NO) to cancel. Once you've pressed the TEMPO [s] button to engage the function you can release the [UTIL- ITY] button. CSelect a Song ... SONG 01 NAME S-ONG 1 Use the [TAP] and [METRONOME] buttons to select the song for which you want to enter a name. The existing song name will appear on the display, or "NO SONG DATA" will appear if the selected song contains no data. "SONG 1", "SONG 2", etc. will appear if the song has not already been given a name. VMove the Cursor to the Appropriate Character Use the TEMPO [s] and [t] buttons to move the cursor to the character location at which you want to enter a character.