Yamaha CVP-89 Owner's Manual - Page 62

58 Utility Functions s 27: The Split Send Mode In the split send mode notes played on the left-hand section of the keyboard (to the left of and including the split point key - see "Changing the Split Point" on page 10) are transmitted on MIDI channel 2, while the upper keyboard section transmits on the MIDI channel set using the Send Channel Select function described earlier. In this mode the left- and righthand sections of the keyboard can be used to play separate external keyboards or tone generators set to receive on the appropriate channels. The Split Send Mode is automatically turned OFF when the power is initially turned on. ZSelect the Split Send Mode Function 27 MIDI SPLIT Select the Split Send Mode function as described in "Selecting & Using the Utility OFF Functions" (page 42), or press [STRINGS] while holding [UTILITY]. XTurn Split Send ON or OFF ... STRINGS 7 STRINGS 7 = Split Send Mode ON. = Split Send Mode OFF. Use the TEMPO [s] and [t] buttons or the [STRINGS] button to turn split send ON or OFF as required. s 28: MIDI Clock Select This function determines whether the Clavinova's rhythm and ABC timing is controlled by the Clavinova's own internal clock or an external MIDI clock signal received from external equipment connected to the MIDI IN connector. The Clock Mode is automatically set to INTERNAL when the power is initially turned on. ZSelect the MIDI Clock Select Function 28 MIDI CLOCK Select the MIDI Clock Select function as described in "Selecting & Using the Util- INTERNAL ity Functions" (page 42), or press [ORGAN] while holding [UTILITY]. XSet the MIDI Clock to INTERNAL or MIDI IN ORGAN 8 ORGAN 8 = MIDI IN. = INTERNAL. Use the TEMPO [s] and [t] buttons or the [ORGAN] button to set the MIDI clock to INTERNAL or MIDI IN as required. NOTES • If the Clock Mode is set to MIDI IN and a MIDI clock signal is not being received from an external source, the rhythm, ABC and other clock-dependent features will not operate. s 29: Panel Data Send This function causes all the current Clavinova panel settings (selected voice, etc.) to be transmitted via the MIDI OUT connector. This is particularly useful if you will be recording performances to a MIDI sequence recorder which will be used to control the Clavinova on playback. By transmitting the Clavinova panel settings and recording them on the MIDI sequence recorder prior to the actual performance data, the Clavinova will be automatically restored to the same settings when the performance is played back. ZSelect the Panel Data Send Function 29 SEND PANEL DATA Select the Panel Data Send function as described in "Selecting & Using the Utility PRESS [START] Functions" (page 42), or press [CHOIR] while holding [UTILITY] to send the data immediately (in the latter case the next step is not required). XSend the Panel Data ...Press the [START/STOP] button to begin transmission of the panel data.