Yamaha DPX-1100 Owner's Manual - Page 24

Select an image for projection Adjusting the image Carry out the following adjustments to obtain optimal projection conditions. Using the test pattern to adjust the projection image - PATT button The DPX-1100 is equipped with three test patterns, the crosshatch pattern necessary for focus and keystone adjustment, and the grayscale and color bar patterns necessary for adjusting image quality. AUTO V. POS ZOOM FOCUS IRIS SETTING PATT ESCAPE MENU PATT button 1. Press the PATT button on the remote control, or the PATTERN button on the main unit. 2. Press the + or - buttons to select the necessary pattern. Crosshatch pattern Grayscale pattern STANDBY/ON PATTERN button 3. To exit from the test display, press the PATT or PATTERN buttons. ESCAPE MENU PATTERN SETTING Color bar pattern ASPECT INPUT LAMP COVER TEMP FAN Adjusting the vertical position - V.POS button If the center of the screen is not in line with the center of the lens of the DPX-1100, use the V.POS button to adjust the position of the image up or down. You can adjust the image to a maximum of half of the height of the projection screen. V.POS button AUTO V. POS ZOOM FOCUS IRIS SETTING PATT ESCAPE MENU STANDBY/ON ESCAPE button ESCAPE PATTERN MENU SETTING button SETTING 1. Press the V.POS button on the remote control, or press the SETTING button on the main unit repeatedly to select [Lens Shift] from the display menu. 2. Press the h or g button to move the projected image to a suitable place. 3. To exit from the adjustment mode, press the V.POS or ESCAPE buttons. Lens Shift ASPECT INPUT LAMP COVER TEMP FAN 20