Yamaha DPX-1100 Owner's Manual - Page 31
Color Adjustment, Level Adjustment, White Peaking
View all Yamaha DPX-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Menu items Menu Color Adjustment (Input signal) Video/S-Video/Component/ RGB TV/RGB PC White Peaking Adjusts color balance. There are three menus available, [Standard], [WRGB], and [WRGBYCM], separated in order of complexity from simple to detailed. Refer to page 36 for parameter operation methods. The present color temperature setting is displayed to the right of the menu items. Color Adjustment Standard 6700K -+0.000uv The current color temperature is displayed. - Standard y Adjusts color temperature and hUV only. hUV adjusts values within the maximum color temperature limits of the projector. 0.5 W (Color temperature and h UV) - WRGB Adjusts the color coordinates and gain for the three primary colors, R(Red), G(Green), and B(Blue). The unit sets the complemental colorsY(Yellow), C(Cyan), and M(Magenta) automatically. Adjusting [Color Temp.] resets the RGB gain based on color coordinate settings. Adjusting [Gain] resets [Color temp.] based on color coordinate settings. - WRGBYCM Adjusts the color coordinates and gain for each component color individually. Press the RESET button on the remote control when the WRGBYCM menu is open to automatically adjust the RGB gain and YCM color coordinates and gain based on the color temperature and RGB color settings. When you have selected WRGBYCM in the color adjustment submenu, press RESET to automatically adjust the RGB gain and YCM color balance to the most appropriate setting, based on color temp and RGB color balance settings. 0.0 0.0 y 0.5 0.0 0.0 y 0.5 0.0 0.0 Choices: White correction : -0.02 to +0.02 Color temperature : 5,000 to 10,000 Gain : 0.00 to 1.99 0.5 x 0.5 x G (Green) W (Color temperature and h UV) R (Red) B (Blue) 7 G (Green) Y (Yelow) 0.5 x C (Cyan) W (Color temperature and h UV) R (Red) M (Magenta) B (Blue) Enhances the brilliance of the white portions of the projected image. Choices: 0 to 5 Iris (Input signal) Video/S-Video/Component/RGB TV/RGB PC Adjusts the iris (Optical). You can select 3 levels. Close Open Level Adjustment (Input signal) Component/RGB TV/RGB PC Adjusts the analog input signal gain and offset settings. Adjust the gain and offset for component and RGB (Y, CB, CR/R, G, B) input signals. Choices: -50 to 0 to +50 (except for HDMI signals) 27