Yamaha DPX-1100 Owner's Manual - Page 62

Message display

Page 62 highlights

Message display No Signal Message Condition The unit is not receiving or detecting any signal at the selected input jack. This message is displayed together with the name of the input source selected with the INPUT button. INPUT A (Component) (Example) The input name selected by the INPUT button is displayed. It will turn off 2 seconds after the signal has been input. Out Of Range Unknown Format Auto Sync... The unit is not able to decode the PC or HDMI signal currently being input. The unit is not able to decode the video signal currently being input. The unit is setting itself to the most appropriate configuration for the RGB signal currently being received. Memory 1-6 Now Processing The memory setting number is displayed for 2 seconds. The lamps has reached its recommended This message is displayed when the power switch is turned on if the lamp running time replacement time. Please replace with a new exceeds 2000 hours. Press the ESCAPE button to remove the message. one. Press again to enter standby. Lens Adjustment is locked. Press the STANDBY/ON button once more to place the unit in standby mode. This message will display for 2 seconds if you press the V. POS, ZOOM, or FOCUS buttons when the [Lens Adjustment Lock] is set to [On]. Invalid Operation Appears in the menu operation guide when you press an invalid button during menu operation. This message displays for 2 seconds. 58

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66

58
Message display
Message
Condition
No Signal
Memory 1
6 Now Processing
The lamps has reached its recommended
replacement time. Please replace with a new
one.
Invalid Operation
Lens Adjustment is locked.
INPUT A (Component) (Example)
Auto Sync...
Out Of Range
Unknown Format
Press again to enter standby.
The memory setting number is displayed for 2 seconds.
This message is displayed when the power switch is turned on if the lamp running time
exceeds 2000 hours. Press the ESCAPE button to remove the message.
This message will display for 2 seconds if you press the V. POS, ZOOM, or FOCUS buttons
when the [Lens Adjustment Lock] is set to [On].
Appears in the menu operation guide when you press an invalid button during menu
operation. This message displays for 2 seconds.
The unit is not receiving or detecting any signal at the selected input jack. This message is
displayed together with the name of the input source selected with the INPUT button.
The input name selected by the INPUT button is displayed. It will turn off 2 seconds after
the signal has been input.
The unit is setting itself to the most appropriate configuration for the RGB signal currently
being received.
The unit is not able to decode the PC or HDMI signal currently being input.
The unit is not able to decode the video signal currently being input.
Press the STANDBY/ON button once more to place the unit in standby mode.