Yamaha DPX-530 Owner's Manual - Page 34

13 Attaching a lens filter and cap ◆ Attaching a commercially available lens filter 1. Carefully turn the projector upside-down. Closed position (no lens filter) 2. Loosen the screw (a) using a Phillips screwdriver (+), and remove the stopper (b). 3. Place a lens filter (c). (a) 4. Rotate the stopper 180° and reinsert it into its original location (d). 5. Tighten up the screw (e) using a Phillips screwdriver (+). (b) Important • Be sure to use a 67 mm lens filter for this projector. • Not all 67 mm lens filters are compatible with this projector. To hold a lens filter (e) (d) (c) ◆ Attaching the lens cap Attach the supplied lens cap when not using the projector to prevent the lens from becoming dirty or damaged. Insert the lens cap until it is securely placed. (It should make a clicking sound.) Important • Do not force the lens cap onto the projector. • Make sure that the YAMAHA name on the lens cap is aligned parallel to the top and bottom edges of the projector. • The lens cap can be placed over the lens filter if a lens filter has been installed. 30