Yamaha DPX-530 Owner's Manual - Page 39

16 Specifications ◆ Projector specifications The specifications and outside appearance of the projector are subject to change without prior notice. Type DLP™ projector Model DPX-530 Display Technology 0.65-inch Single chip DMD (Aspect ratio 16:9) Pixel 1024 × 576 = 589824 pixels Projection lens F 2.4 - 2.6 f= 23 - 27.6 mm Light-source lamp 250 W Image size (Projection distance) 40" min. to 275" max. (Projection distance 1.3 to 10 m) Maximum number of display colors 16770000 (full-color display) Maximum resolution Computer signal Maximum resolution: 1280 x 1024 dots (Analog) / compressed Panel resolution: 1024 × 576 dots Video signal NTSC / PAL / SECAM / 4.43NTSC / PAL-M / PAL-N / PAL-60 Component signal 480i, 480p, 576i, 576p, 720p, 1080i Panel resolution: 1024 × 576 dots Input terminal [Signal type] Analog RGB Digital RGB Video input S-Video input Component video input [Terminal type] D-SUB 15P DVI-D RCA × 1 S RCA × 3, D-SUB 15P [Line] 1 1 1 1 2 Control terminal/Others RS-232C (8P): For service person Operating temperatures +41°F (+5°C) to +95°F (+35°C) Rated voltage AC100 - 240V, 50/60Hz Power consumption 3.5 A Dimensions 360 mm (W) × 102 mm (H) × 290 mm (D) *Not including protrusions. Weight 3.9 kg Others S-video input Luminance signal: Vp-p=1.0 V 75Ω (negative sync) Chrominance signals: Vp-p=0.286 V 75Ω (burst signal) Video input Vp-p=1.0 V 75Ω (negative sync) Component video input Analog RGB input YCBCR: Vp-p=1.0 V 75Ω (Y) (negative sync) Vp-p=0.7 V 75Ω (CB, CR) RGB: Vp-p=0.7 V 75Ω (negative sync) HD: TTL-level (negative or positive polarity) VD: TTL-level (negative or positive polarity) Digital RGB input DVI interface (TMDS single link) 35