Yamaha DPX-530 Owner's Manual - Page 37
Others, If the following problem occurs after the lamp is replaced, check the following first
View all Yamaha DPX-530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Others Problem Solution The exhaust vents emit warm • This air comes out after cooling the inside of the projector. It may feel hot, but this is not a malfunction. air. The menu can't be used. • The microcomputers inside the projector may be wrongly operating because of noise. ➜Press the STANDBY/ON button to turn off the lamp and unplug the power cable from the wall outlet. Wait about 10 minutes, plug the power cable in, and try again. "TEMPERATURE!!" is displayed. • This indication appears when the ambient temperature rises high. When the ambient temperature stays high, the lamp goes out. ➜Eliminate any causes of the rise in the ambient temperature. • This indication appears when the air intake or exhaust vent is blocked. When they are kept blocked, the lamp goes out. ➜Remove the objects blocking the air intake or exhaust vent. The mark appears. • This mark appears when ineffective operation is carried out. This isn't a product malfunction. The remote control doesn't function easily or at all. • Check that the battery is loaded in the remote control or the battery isn't weak (see page 4). • Check that the remote control sensor isn't exposed to direct sunlight or fluorescent light. • Use the remote control within its operation range (see page 7). • Use the remote control at least 10 cm away from the projector. Abnormal sound is heard. • Because the color wheel spins at a high speed, metallic sounds may be heard in rare occasions. This is not a malfunction. If the following problem occurs after the lamp is replaced, check the following first. Problem The projector does not turn on. The STATUS indicator blinks. Solution • Fit the lamp cover securely (see page 29). • Reset the lamp operating time (see page 29). • Reset the lamp operating time (see page 29). 33