Yamaha DTX700 Reference Manual - Page 62
File/format - trigger module
View all Yamaha DTX700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
FILE 4. Turn the dial to move the cursor to the File row, and then press the dial. 5. Select the file to be deleted by turning the dial or pressing the [-/DEC] and [+/INC] buttons. Only those files matching your selected file type from the previous step will be presented for deletion. 6. Press the [F3] button (EXECUTE). You will be asked to confirm that data is to be deleted. Procedure 1. Plug the USB memory device to be formatted into the [USB TO DEVICE] port on the side panel. 2. Navigate to the Menu area's File/Format page and press the [F3] button (EXECUTE). You will be asked to confirm that the USB memory device is to be formatted. 7. Press the dial to begin deleting. When the deletion process has been completed, the message "Completed." will be displayed and you will be returned to the page from Step 2 above. 3. Press the dial to begin the formatting process. The following message will be displayed as the device is being formatted. CAUTION • Do not unplug the USB memory device from the [USB TO DEVICE] port or turn off either the memory device or the DTX700 while data is being deleted. Failure to observe this precaution can lead to the memory device or the DTX700 being permanently damaged. FILE/FORMAT Certain types of USB memory device must be formatted before they can be used with the DTX700. The correct way to format such a device is described below. CAUTION • All data on the USB memory device will be deleted during the formatting process. Before formatting such a device, therefore, ensure that any important data it contains is backed up. NOTE • In certain cases, USB memory devices formatted on a com- puter will not be recognized by the DTX700. Be sure, therefore, to always use the drum trigger module to format memory devices that will be used with it. CAUTION • When a USB memory device is being formatted, it must not be unplugged from the [USB TO DEVICE] port; furthermore, neither the memory device nor the DTX700 should be turned off at this time. Failure to observe this precaution can lead to the memory device or the DTX700 being permanently damaged. When the formatting process has been completed, the message "Completed." will be displayed and you will be returned to the page from Step 2 above. DTX700 Reference Manual 62