Yamaha ELS-01 Owner's Manual - Page 53

FILL IN This is designed for use as a temporary and regular rhythmic pattern to spice up a repeating rhythm. There are four Fill In sections that can be played by pressing the selected (lit) MAIN/FILL IN [A] - [D] buttons as desired. When one measure pattern of Fill In finishes playing, the rhythm is automatically shifts to the Main section. MAIN / FILL IN A B C D Selected Fill In section's lamp flashes BREAK This lets you add dynamic variations and breaks in the rhythm pattern. The Break section is selected by pressing the [BREAK] button. When the one-measure Break pattern finishes playing, the rhythm automatically shifts to the Main section. 5 SYNCHRO START START BREAK Rhythm/Keyboard Percussion The lamp is lit when the Break section is selected ENDING This is used for the ending of the song. There are three Ending sections that can be selected with the ENDING [1] - [3] buttons. When the ending is finished, the rhythm automatically stops. ENDING 1 2 3 Selected Ending section's lamp is lit Operating the rhythm from the panel You can turn the rhythm on/off and switch the sections as desired by pressing the buttons on the panel. Using the Fill Ins and Break patterns let you add dynamic interest and "spice" to your performance. To start/stop the rhythm: START The rhythm begins as soon as the [START] button is pressed. To stop the rhythm, press the button again. SYNCHRO START START SYNCHRO START The [SYNCHRO START] button puts the rhythm in "standby." The rhythm starts when you press a note on the Lower keyboard or Pedalboard. When you start the rhythm with the [SYNCHRO START] button, pressing this button again stops the rhythm. SYNCHRO START START ELS-01/01C Owner's Manual 53