Yamaha EMX5014C Owner's Manual - Page 10
Adding Some Reverb, Set the EFFECT RTN fader to the 0 position. - mixer
UPC - 086792838274
View all Yamaha EMX5014C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Mixer Basics Quick Guide Adding Some Reverb You can use the reverb effect to simulate the sound of a concert hall or jazz club. 4 1 2 3,5 1 Turn the PROGRAM dial to select the desired effect type. To select a reverb effect, turn the dial to any value from 1 to 7. 1 REVERB HALL 1 5 REVERB STAGE 1 9 KARAOKE ECHO C 2 REVERB HALL 2 6 REVERB STAGE 2 0 VOCAL ECHO D 3 REVERB ROOM 1 7 REVERB PLATE A CHORUS 1 E 4 REVERB ROOM 2 8 DRUM AMBIENCE B CHORUS 2 F 2 To turn on the effector, set the EFFECT ON switch to its ON position ( ). The switch lights up when turned on. As an alternative to the ON switch, you can use a separately sold FC5 foot switch to toggle the effector on and off. FLANGER PHASER AUTO WAH DISTORTION 3 Set the EFFECT RTN fader to the "0" position. 4 Use the channel EFFECT knobs to adjust the effect depth for each channel. 5 Use the EFFECT RTN fader to adjust the overall effect depth. Note that you can use the PARAMETER knob to adjust the characteristic sound of the selected effect. If you have selected a reverb effect, the knob adjusts the reverb time. 10 EMX5014C Owner's Manual