Yamaha EMX5014C Owner's Manual - Page 7
Quick Guide, Getting Sound to the Speakers - used
UPC - 086792838274
View all Yamaha EMX5014C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Mixer Basics Quick Guide Getting Sound to the Speakers We begin by connecting up two speakers and generating some stereo output. Note that operations and procedures will vary somewhat according to the input devices you are using. 1 1 Connect up the speakers and your input devices (microphones, instruments, etc.). Use non-powered speakers and dedicated speaker cable. Connect one speaker to SPEAKERS jack A (A1 or A2), and the other to jack B (B1 or B2). Then connect your input devices (microphones, guitar, etc.) to the appropriate input jacks on the top panel. For details, see page 30. • Before connecting input devices to the EMX, be sure that all of these devices (including microphones) are powered off. And before turning the power to any device on or off, be sure to turn the volume of that device all the way down. • Never connect both A and B jacks to a single speaker. Connection of both jacks to the same speaker may result in damage to the mixer. NOTE We recommend that you avoid connecting electric instruments (such as electric guitars and basses) directly to the EMX. Instead, these instruments should be connected through an intermediary device such as a direct box, a preamp (guitar amp), or an amp simulator. 1 RIGHT WRONG!! EMX5014C Owner's Manual 7