Yamaha EX7 Wave Editor Twe Owner's Manual - Page 13
The status bar located in the lower part of the Wave window displapys
View all Yamaha EX7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
loop region shown in the time axis ruler, the mouse pointer will change shape, and you can drag to left or right to modify the start/end points of the loop region. By dragging the mouse within the loop region (brown, with the default settings) in the time axis ruler, you can change the location of the loop region without affecting the length of the loop. In addition, if you hold down both the Option key and the Shift key and then click outside the loop region shown in the time axis ruler, the loop region will be extended to that point. By clicking any other point in the time axis ruler, you can set the playback start time to that location. 4.8. Overall waveform display (Overview) The overall waveform display shows a graphic image of the entire sound file that is currently opened by TWE. The rectangular bar (light green by default) indicates the portion of the entire waveform that is currently displayed at a higher magnification in the waveform display. By clicking in the overall waveform display, you can specify the region of the waveform which will be displayed in the waveform display. You can also hold down the Option key and drag to specify the region of the waveform which will be displayed in the waveform display. 4.9. Status bar The status bar located in the lower part of the Wave window displapys the following information, from left to right. < Waveform scan ratio > The progress of the scanning that is performed in order to generate the waveform display data is displayed here as a percentage. When the scan is completed, this will indicate "100.0%." < Mouse cursor location on the time axis > This indicates the location of the mouse pointer within the waveform display area. The units are the same as those currently selected for the Time Ruler. If the Time Ruler is not being used, this location will be shown as time (hours:minutes:seconds.milliseconds). - 13 -