Yamaha EX7 Wave Editor Twe Owner's Manual - Page 29

If either the start point or the end point are changed to a location that is near the level of the other point (the existing end point or start point), the newly set point will be moved to a location of a matching level. If both points are newly set, the end point will be moved to the level of the start point. * The start point and end point will always move toward the inside of the region. * If two or more channels are selected, the points will be moved according to the data of the upper channel. * The range of the adjustment performed by Auto Snap will not exceed five seconds for either the start point or end point. * With the default settings, Auto Snap will match the upward/downward level slope of the start point and end point, but you can make settings in the "Preferences..." dialog box so that this will be ignored. For details refer to "8.3.3. Others." 7.5. Hide (or Show) File/Device Info Toggle the file information display and device information display between hidden and visible. 7.6. Hide (or Show) Waveform Toggle the waveform in the waveform display between hidden and visible. 7.7. Hide (or Show) Overview Toggle the overall waveform display between hidden and visible. 7.8. Time Ruler Select whether the time axis (horizontal) of the waveform display will be displayed in the specified units or will be hidden. Hide the time axis. - 15 -